December 02, 2015
3 Steps to Add WIFI for BMW ICOM A1 Clone
Step 2 - Add wifi card:
Step 3 - Test: work fine
Here is the easy instruction to help you add wifi for your cloneICOM A1, only 3 steps is needed to makeICOM A1 becomewifi BMW ICOM A2:
Step 1 -Add Mini PCI Type III 124 pins Socket:
Step 2 - Add wifi card
Step 3 - Test: work fine
start with this
And this, Wieson 6156 Series Mini-PCI TypeIII Socket 124Pin 6156E024-004
You can buy 5 sockets
First placement
First placement
Let's go to serious things
Looks good
Card on
You will need last3.10.44 Icom's Firmwareto have Wifi on any router.
You can download it here: http://uptobox.com/l60dmxgc47bq
Upgrade the firmware then go tohttp://ip.of.your.icom:58000/?CodeCountry=DE
You can download it here: http://uptobox.com/l60dmxgc47bq
Upgrade the firmware then go tohttp://ip.of.your.icom:58000/?CodeCountry=DE
It is not necessary to get expensive but very rare Sparklan WMIA-199N Wifi card. "cheap" wifi card based on Atheros 9160 chipset is okay with those antennas.
As you can see on the screenshots below. It works fine.
Priority is set to LAN if you want to use WIFI connect yourICOMto your car without LAN cable connected.
Now, youricom a1will be like BMWICOM A2+B+Cscanners, which can be used with WIFI.
Posted by: jean at
03:37 AM
| No Comments
| Add Comment
Post contains 192 words, total size 5 kb.
23kb generated in CPU 0.0572, elapsed 0.3923 seconds.
35 queries taking 0.3695 seconds, 170 records returned.
Powered by Minx 1.1.6c-pink.
35 queries taking 0.3695 seconds, 170 records returned.
Powered by Minx 1.1.6c-pink.
