What Tool to Program Smart Key for Nissan Sentra 2020-2023?

What tool to program 2019, 2020, 2021, 2022, 2023 Nissan Sentra proximity smart key? add key and all keys lost?

 

1.

Lonsdor K518 Pro/K518 Series:

2019-2021 Nissan Sentra: Lonsdor will only add key (withNissan gateway adapter), it cannot read security password (pin code), it cannot do all keys lost.

2021.08-2023 Nissan Sentra: Lonsdor will add key and do all keys lost. RequireB18 Chassis License Online ActivationandNissan 40 pin BCM cable.

 

Some FAQs of Lonsdor & Sentra

Q: I have Nissan Sentra 2021 All key lost.
It’s with pincode 28 digits.
Will Lonsdor k518 program this proximity?

A: Lonsdor cannot read pin code. Need pin code from the manufacturer.

 

 

Q: Will Nissan Sentra 2020 all smart key lost if i can get pin code?

A: Yes, need a gateway adapter.

 

Q: Will Lonsdor read 2021 Nissan Sentra pin code?

A: No, it cannot read pin code

 

Q: Will lonsdor k518 program 2022 nissan Sentra all keys lost?

A: No, it cannot read pin。

 

Q: Will K518PRO do 2020/2021/2022 Nissan kicks, Sentra, versa/rouge all keys lost?

A: Nissan kicks ok, Sentra/Rouge 2021- yes with gateway adapter, 19-21 requires password, Versa 2020-2022 All keys lost need luck.

 

Q: If the Lonsdor Nissan 40 pin BCM cable will work on the new Sentra 2020 and up?
Also do I need to buy a license and how does it work?

A: Yes, does require Nissan license.

 

Q: Does Lonsdor make key Nissan Sentra 2021 all key lost without pincode?

A: No, does require pin code.

 

 

2.OBDSTAR Tools

OBDSTAR x300 dp plus(key master dp plus) and x300 pro4 (key master 5) will do 2019 to 2023 Nissan Sentra add key and all keys lost bypass pin code.

 

May 2023 New Update:
Adds Nissan Sentra 2021.08- smart key add key & all keys lost (requireNissan 40 BCM cable)

 

The Nissan BCM40 gateway adapter can be used to replace Nissan/Renault 16+32 cable.

 

Here comes the OBDSTAR Nissan Sentra car list

It will do North American Sentra proximity 2019-, add key and all keys lost. Need gateway adapter to bypass pin code.

It also does Sentra blade key till year 2019.

 

 

3

Autel IM508/IM608

IM508/IM608 will do 2019 Nissan Sentra add key and all keys lost.

For 2020-2023 Nissan Sentra

If all keys lost, it cannot read password pin code. But yes if you can get pin code.

If add key, it will do, but it can only read pin code for part of vehicle software numbers.

Posted by: jean at 07:36 AM | No Comments | Add Comment
Post contains 418 words, total size 9 kb.

How to Add OTOFIX IM1 Diagnostic Software?

To unlock the full system diagnostic software of OTOFIX IM1key programmer, you need to pay for subscription.

 

How to Activate OTOFIX IM1 Full System Diagnostic Software?

 

Go to Advanced Service List-> Purchase Diagnostic Service

$139 for the first-year activation
$10 subscription per year later.

Posted by: jean at 08:18 AM | No Comments | Add Comment
Post contains 51 words, total size 1 kb.

OBDSTAR X300 DP Plus Reset 2017 Ford Mustang SRS

This post is a recent experience doing a crash reset with myOBDSTAR X300 DP Pluson a 2017 Ford Mustang. I did it by OBD and module stop communicating after the eeprom write. I bought a used module, which also had crash data but did it on bench and worked just fine. We all know there is always risks associated with crash reset, but always try to minimize said risks by using the most secure method even if it means having to remove the module from the vehicle.

I've done a bunch of resets via OBD successfully, I love this tool, but hopefully this post will help other people avoid having to source a replacement module due to going bad.

Posted by: jean at 08:19 AM | No Comments | Add Comment
Post contains 128 words, total size 2 kb.

How to Clone Land rover 8HP70 Gearbox by Launch X431 IMMO Plus

Launch X431 IMMO Plus user report:

LANDROVER DISCOVERY 4
TRANSMISSION REPLACED
8HP70 GEARBOX TCM CLONED with Launch IMMO Plus
WORK WITHJLR SDD&LAUNCH X431 IMMO PLUS

IMMO Plus also clone 8HP45, 6HP26, MPS6 and ZF9HP TCMs for Land rover.

Images attached.

 

Posted by: jean at 06:50 AM | No Comments | Add Comment
Post contains 52 words, total size 9 kb.

How to Add Ford Transit 2018 Spare Key by lonsdor K518

Lonsdor K518added FordTransit Custom 2018 spare key successfully.

 

 

New key to be programmed

Go to Immo& Remote->Ford->Europe-> Transit Custom->2017 up->Immobilizer

Read key number

Insert new key to be programmed and switch ignition to ON position

Reading PIN Code

 

 

Program key in process

Programming completed

Posted by: jean at 07:38 AM | No Comments | Add Comment
Post contains 55 words, total size 9 kb.

Launch CRP919X Remember Porsche Last State of Auto Stop/Start

Remember Last State of Auto Stop/Start (ASS) (done and works using Launch CRP919X scanner.

ASS remembers the last state of the Auto Stop/Start rather than always being on when you start the car.

 

Air Conditioning: Coding value--Default Driving State Coding Value = Last Mode
{Default: Eco ON}

Air Conditioning: Coding value--Default Driving State Coding Value Last Mode = Yes
{Default: No}

Additional potential for Auto Start/Stop
Gateway > Start/stop function > Start/stop function--Start/stop function (SSF): [Start/stop Not Activated]

 

 

Posted by: jean at 06:44 AM | No Comments | Add Comment
Post contains 84 words, total size 3 kb.

How to Use Subaru SSM3 SSM4 with SM2 Pro

How to get theScanmatik 2 PROinterface to work with Subaru SSM3 and SSM3 software?

 

Here is the clue.

SSM3 is configured for Scanmatik 2 Pro – Only Install SM2 Pro Drivers & Select SM2 Pro.
SSM4 is configurated Passthru – Only Install Passthru Drivers & Select Interface.

You need driver/emulator for you to use a j2534 with SSM3.

For SSM4 you can use any J2534 VCI. Only SSM 4 supports J2534 interface.

 

Download SSM3/SSM4 VM for passthru

Subaru Select Monitor 3 – 04.2019
Subaru Select Monitor 4 – 07.2021

 

 

For SSM3 the 1st thing you need to do is install Scanmatik Drivers, after start SSM3 and select SM2 USB.
SSM3 should close and when re-opening everything should work.

For those who want Scanmatik 2 Pro as an option in their Native installation, here is the setup file to those who like to have Scanmatik 2 Pro configurated to SSM3,
SSM3xSM2Pro setup
If you are using x64 then Download SSM3 x SM2Pro . rar and run the x64 .exe in the VM. It should solve the issue.

The Interface must support old "PassThruSupport” (02.02 NOT 04.04) with registry entry. Then You must export this entry and import and replace it in Subaru Section under:
Right click and Export "PassThruSupport.reg” and upload it.

 

 

 

SSM3 and SM2 Pro some reports:

1.
Legacy 2004
Tested accessing immo, seems to work but did not have security id

2.
Tested on XV, Can connect to ECU and one other system

3.
I can confirm SSM3 is working with Scanmatik 2 Pro 100% (tested on Outback diesel MY 2012). I was able to connect all available modules (although a main purpose was i needed to do EGR compulsory setting).

 

4.
original scanmatik application easely connect to ECM and TCM. Read DTSs and params via ODB. Launch x431 too connect but can’t connect to Air Conditioner. FreeSSM can connet only to ECM and TCM.

 

 

SSM4 & Scanmatik 2 Pro

If SSM4 ask key for activation, you can use WinSpy to activate it by yourself.

 

 

How to activate with WinSpy?

RunSSM4.
Run WinSpy.
In WinSpy, click Tree and in the window that appears, click Activation and Skip 2 times with the left mouse button.
Click on Command in the WinSpy window and enable the Enabled checkbox.

 

Feedback:

Before installation, set the date on the computer to July 1, 2021 and after installation, the date can be returned back.

To activate, copy the ssm4_loader.exe file to the c:\Program Files (x86)\subaru\SSM4\BrandCommon\Bin\ folder, display a shortcut from it to the desktop and run from it.

 

If you have other J2534 passthru interfaces, set up as following

How to Set up Subaru SSM4 with J2534 Device?

 

If need a good SSM3 emulator also j2534 for SSM4,VXDIAG Subaruis the best choice.

Free Download Subaru SSM3 SSM4 V2020.7 Software and Patch

Posted by: jean at 06:36 AM | No Comments | Add Comment
Post contains 475 words, total size 7 kb.

CG100X Software Update to V1.3.8.0

CGDI CG100X Programmer software update to V1.3.8.0 on Jan. 18th, 2024.

V1.3.8.0 NEW

(2024.01.1

1.Volkswagen MQB adds 6 new capacitor removal method models and Volkswagen Generation 4 anti-theft adds 1 new capacitor removal method model.

2.Added 27 models to dashboard.

3.Added 2 models to read-write.

The following models are added for dashboard.

VESPA 300 24C512

BAIC EU5 2022-24C64(Dashboard)+95320(BCM)

Honda HRV 2019- MB91F061BS

DongFeng Fengshen E3 R5F10DSLL

DongFeng Captain K6 93C86

DongFeng Tuyi T3Q 2021- 24C04

SouthEast DX3 2018- 9S12XHY128

Redflag EQM5 24LC16

Geely Remote GLR 24C04

Geely Yuanjing S1 2017- 24C16

JMC BaoDian 2020- S6J334CJEE

Jingong 90 Digger 24LC64

Liugong 60 Digger 25640

Liugong Forklift 9S12HA48

Chery Karryyouyuex6 2023- 24C16

Nissan Quaker 2005- 9S12H128

Lingong 956 Digging machine 2021- 9S12HY48(time)

Sunlong BUS 2018- R7F701404

T-KNG ouling GL-III 2022- 24C16

Volvo S40 9S12HZ256

Hyundai 60VS Digger 95M01

KOMATSU 360 93C86

Iveco CHAOYUE 2022- 24C04

Yutong Bus 2019- 24C16

ChangAn CS15 EV400 95040

ChangAn UIN-V 24C16

Great Wall Harvard F5 2020- 24C08

The following models are added for dashboard read-write.

BMW E90 E91 LED BASIS ST10F269(read write)

Geely Xinrui 2021- R7F701603(read write)

Posted by: jean at 07:44 AM | No Comments | Add Comment
Post contains 185 words, total size 2 kb.

How to Transfer Foxflash Ownership if Buy an Used Tool?

If you are going to buy a usedfoxflash toolor sell your foxflash to another guy, how to transfer ownership?

 

Here is the clue.

You can read the instructions on foxflash official website:

To transfer foxflash ownership, you need to

1. Contact your original seller(send S/N and order information. to ensure you are purchasing an eligible item) Your seller will report the transformation request to foxflash team.

2.Contact info@dfb-technology.com(send S/N, seller information and request)

 

Before buying used foxflash products, foxflash tech will ask you send both the serial number of the tool and the data of the seller so that you know

-Type of license and activated software packages
– Possibility of installation on other computers
-Warranty on any damage
-Cost of transfer of ownership

Contactinfo@dfb-technology.com

 

Any questions feel free to contactwww.obdii365.com

Posted by: jean at 07:04 AM | No Comments | Add Comment
Post contains 141 words, total size 2 kb.

What is the Difference between Autel AP200 and AP2500

What is the difference between Autel MaxiAP AP200 and new AP2500E/AP2500 Bluetooth obd2 scanner?

	Autel AP200	Autel AP2500E
Model Coverage	More than 60 brands	More than 60 brands
CAN FD protocol	No	Yes
Full OBDII functions	Yes	Yes
All system diagnostic	Yes	Yes
Oil reset	Yes	Yes
EPB reset	Yes	Yes
BMS reset	Yes, Register Battery Replacement	Yes, Register Battery Replacement and EV battery
SAS reset	Yes	Yes
TPMS reset	Yes	Yes
IMMO Service	Yes	Yes
DPF Regeneration	Yes	Yes
Auto VIN	Yes	Yes
DTC lookup	Yes	Yes
Multi-language	14	Yes
System	Android & iOS	Android & iOS
Communications	Bluetooth 4.2Dual Mode	Bluetooth V5.0+ BR/EDR/BLE
App	MaxiAP200	MaxiDiag App
One free vehicle’s software with the initial purchase	Yes	Yes

In sum:

The biggest difference is that AP2500E supports CAN FD protocols for latest GM etc. AP200 does not.

They use different App, AP200 usesMaxiAP200while AP2500E usesMaxiDiag App.

Their App has different layouts.

Posted by: jean at 07:20 AM | No Comments | Add Comment
Post contains 161 words, total size 5 kb.