How to Identify CGDI Wire, Wireless and Smart Remote

CGDI has also released a series of universal remote keys. How can we tell between these different types of keys? Here are some clues.

 

CGDI remote keyscan be divided into 3 types:

Remote starts withC13– is thewired remote. Generating a brand-new wired remote will get25 points.

Remote starts withC14-is thewireless remote.Generating a brand-new wireless remote will get40 points.

Remote starts withC15-is theNXPsmart remote. Generating a brand-new smart remote will get60 points.

CGDI provides BMW, Ford, Mercedes-Benz, Porsche, Subaru, and Toyota types of smart remotes.

 

Points can be exchanged for tokens to clone ID48 96bit transponderCGDI K2key tool.

90 points= 1 calculation(ID48 96bit).

 

NOTE:

CGDI remote keys can ONLY be generated by CGDI devices.

Buy 20 CG remotes, send id48 96bit tokens for 6 months (1 token per day). Buy 40 remotes, send 1 year of unlimited tokens.

 

Posted by: jean at 08:31 AM | No Comments | Add Comment
Post contains 146 words, total size 4 kb.

CG100X V1.8.5.0 Adds Toyota S6J3001 Dashboard by CAN

CGDI CG100X programmer released new software version V1.8.5.0 on May 28th, 2025. The new version adds more Toyota S6J3001 mileage correction models by CAN.

 

CG100X previously supported some models for odometer correction by soldering (here is anexample), but now it has been upgraded to cover more vehicle models and supports CAN mode for odometer adjustment.

 

CGDICG100Xnew version V1.8.5.0 update details:
1. Added 1 chip to Programmer.
2. Added 25 models to dashboard.
3. Added 1 models to read-write.
The following chips are added for Programmer.
9S12ZVCA192
The following models are added for dashboard.
Toyota Super bully 2019- S6J3001 CAN
Toyota AVALONlion 2019- S6J3001 CAN
Toyota AVALON 2018- S6J3001 CAN
Toyota AVANZA 2023- S6J3001 CAN
Toyota CAMRY 2018- S6J3001 CAN
Toyota CHR/IZOA(Yize) 2018- S6J3001 CAN
Toyota COROLLA 2018- S6J3001 CAN
Toyota Corolla Cross 2021- S6J3001 CAN
Toyota CROWNLUFANG 2018- S6J3001 CAN
Toyota Granace 2019- S6J3001 CAN
Toyota Granvia S6J3001 CAN
Toyota Harrier 2016- S6J3001 CAN
Toyota HIACE 2019- S6J3001 CAN
Toyota Highlander 2018- S6J3001 CAN
Toyota Levin 2019- S6J3001 CAN
Toyota Levin 2019- S6J3001 CAN
Toyota RAIZE 2023- S6J3001 CAN
Toyota RAV4 Rongfang 2019- S6J3001 CAN
Toyota Sienna 2019- S6J3001 CAN
Toyota TACOMA 2018- S6J3001 CAN
Toyota Venza 2019- S6J3001 CAN
Toyota VIOS 2023- S6J3001 CAN
Toyota WILDLANER 2019- S6J3001 CAN
Toyota YARiS S6J3001 CAN
Toyota Yaris 2019- S6J3001 CAN
The following models are added for dashboard read-write.
Land Rover L8B2-10C784-AJ 9S12ZVCA19V(0N25N)(read write)

 

CAN mode requires the 35xx CAN adapter. The adapter is included in the package.

Check CAN mode connection diagram in the CG100X software.

 

Posted by: jean at 07:38 AM | No Comments | Add Comment
Post contains 263 words, total size 4 kb.

Program Renault CLIO 5 2020 Key with OBDSTAR G3 and RH850 Adapter

Question:Is it possible to program Renault Clio 5 MY2020 smart key when all keys lost withOBDSTAR X300 Classic G3? Just unlocked the gateway, will G3 program the smart key card directly into the OBD port?

 

No, If add key you can use16+32 gateway cable. It works well.

For example:

Read Clio V 28-digit pin code and add a new card by using bypass in gateway without any problem.

 

 

But it cannot do all keys lost via the gateway adapter.

 

 

G3 will program Clio 5 all keys have lost with the newRH850 adapter.

Here comes the real user feedback:

"Test completed. AKL is only possible to get with the pin code via C4/06 cable. Successfully read the pin code from a Clip 5 BCM R7F701056 using the OBDSTAR G3. You will see BCM connection diagram in the device. Work perfectly. abrites off course easy but just activation for renaults are few times more expensive then obdstar g3..for all brands.”‘

Posted by: jean at 08:01 AM | No Comments | Add Comment
Post contains 170 words, total size 3 kb.

Yanhua ACDP Module 38 Adds BMW BDC2 Module Replace Function

Good new forYanhua Mini ACDP module 38users. Module 38 release free update for BMW BDC2 module reflash and copy replacement functions. Now ACDP will not only add BMW G series BDC2 keys, but also replace BDC2 modules.

Enjoy free upgrades for both features with an active license 38.

 

Module 38 New Update Feature:

Adds BMW BDC2 Module reflash function.
Unlock second-hand BDC2 module and erase it to the unlocked state.

Add BMW BDC2 module copy replacement function.
1).Back up immo data of the car’s original BDC2 module and working key.
2).Write IMMO data to a second-hand or brand new BDC2 module.
3).No need to deal with the TCM nor DME, and it will not affect ordering keys from dealer in the future.

Menu Path:

Go to FEM/BDC- IMMO/Mileage – BDC2 ICP+OBD (F/G Chassis)- Module Replace.

 

 

If need to reflash module, selectErase module datafunction.

If need to replace the BMW BDC2 module, selectCopy data replacefunction.

Step 1: Back up old module data.

• Backup FAFP data
• Backup IMMO data

Step 2: Write data to new module.

• Back up coding data.
• Write IMMO data.
• Write FAFP data.
• Write coding data.

Posted by: jean at 07:03 AM | No Comments | Add Comment
Post contains 197 words, total size 8 kb.

Generate VW Golf 7 MQB Key using Autel IM508 and iKey

In this guide, we will walk through the process of generating anMQB48 keyfor a2017 Volkswagen Golf 7instrument cluster usingAutel IM508. This method involves repurposing anAutel keyinto a functional Golf 7 key using a universal key generation tool.

 

 

Step-by-Step Process

1. Accessing the Key Generation Menu

• Navigate to the"Universal Key”section and select"Accept.”

• Choose"Europe”as the region and locateVolkswagenin the manufacturer list.

2. Selecting the Correct Model and Platform

• Select"Golf”as the model and set the year to2017.

• Confirm the platform asMQB.

• The system will display theMQB48 key profile, which operates at434 MHzwith anIMMO type of MQB.

3. Preparing the Donor Key

• Insert thedonor key(in this case, anAutel universal ikey) into the programming device.

• Visually verify that the key matches theMQB48design (as shown on the tool’s reference image).

4. Generating the Key

• Select"Generate Universal Key”to begin the process.

• The tool willflush the XP400and start programming the key.

• Monitor the progress until completion (approximately halfway, a confirmation message will appear).

5. Verifying the Key

• Once generated, the system will prompt:"Universal key generation is completed. Do you want to continue generation?”Select"No”to finish.

• Test the key by inserting it into theGolf 7’s instrument clusterand reading the chip.

• Confirm that the key is recognized asMQB48and operates at434 MHz.

Conclusion

Success! The newly generatedMQB48 keyis now ready for use in the2017 Volkswagen Golf 7. This method demonstrates how auniversal key systemcan repurpose non-OEM keys (like hotel keys) for vehicle immobilizer compatibility.

Final Notes:

• Ensure you have legally obtainedIMMO data(immobilizer information) before starting.

• Always test the key in the vehicle to confirm functionality.

Posted by: jean at 07:53 AM | No Comments | Add Comment
Post contains 264 words, total size 12 kb.

Yanhua Mini ACDP CAS3 Download Failed Solution

Problem:

Yanhua ACDP2failed to write BMW CAS3 EEPROM. It says error "Download failed, check network". Any solution?

Possible reason:

1. Network problem.

2. The phone is running out of storage space.

Posted by: jean at 06:12 AM | No Comments | Add Comment
Post contains 49 words, total size 2 kb.

AP-PRO2 VAG RH850 R7F701407 Odometer Correction

APPRO2key programmer not only program keys for VAG RH850 MQB 5A clusters, but also do mileage correction.

Supports 5A, 5C and 5D clusters.

Processor: R7F7014xx.

Adapter: use A0C adapter in the package.

No lift pin, no cut wires.

Function requires network connection.

Select R7F7014XX mileage function.

Calculate original odometer online.

Then input new mileage you desired.

Example: VWR7F701407 mileage correction with AP-PRO2.

Images attached:

Posted by: jean at 07:03 AM | No Comments | Add Comment
Post contains 70 words, total size 10 kb.

Autel KM100 Adds Hyundai Santa Fe 2022 Smart Key

Car Brand: Hyundai

Model Car: Santa Fe
Year of manufacture: 2022

Chip type: 4A
Programming a new smart key Smart / Keyless GO

Device used:Autel KM100

Read pin code ok.

Add key guided.

Posted by: jean at 07:42 AM | No Comments | Add Comment
Post contains 42 words, total size 5 kb.

Autel Smart Key Toyota keyless Not working solution

Problem:

I did anautel ikeyfor a 2020 Yaris Remote works and car only start when push button with key. I have replaced battery but keyless entry and start didn’t work.

the remote does work lock and unlock the car.
But keyless detection not work.
I tried different frequencies but didn’t program to the car.

Anyone had problem with autel key?

Solution:

Wrong frequency!
Change the frequencyon the key should work.
Change the frequency in Autel setting.
Go to
Special functions.
Botton adjustment.

 

Report:
I did it and did work.

Posted by: jean at 07:06 AM | No Comments | Add Comment
Post contains 97 words, total size 3 kb.

How to Add BMW BDC2 Key by Yanhua ACDP2

Tutorial: How to add BMW G series BDC2 key withYanhua Mini ACDP and module 38.

I. Identify Vehicle Info.
Run ACDP App.
Select BMW Function- FEM/BDC- IMMO/Mileage-BDC2 ICP+OBD (F/G Chassis).

SelectIdentify vehicle info.
Connect ACDP with the vehicle via OBDII port.
Save the vehicle system data.

Verify the car info.
Take a screenshot of the original vehicle info.
Click Continue.

Check if the IMMO type is supported by ACDP, here the IMMO type is supported.

II. Obtain Key data
Select Obtain key data.

Step 1: Read coding data.
Remove BDC2 module and disassemble it.

Check Help to check the connection.
Connect BDC2 ICP interface with with BDC2 module like this:
https://www.obdii365.com/service/how-to-install-yanhua-acdp-bmw-bdc2-interface-board.html

Then select Step 1: Read coding data
Read vehicle info again and confirm.
Read and save coding data.

The file name should end with "Coding.bin".
Finish backup coding data.


Step 2: Read keys data
ConnectACDP, ICP interface board and BDC2 module.
Check PIN status.



Read system info.
Reading keys data.
Save BDC2 key's data.
Pay attention to the path, date and time of the backup file.
The file name should end with "BdcData.bin".


Verify IMMO Information.

Click Continue.
Start getting data from server, and enable stable network connection.
Prepare to program, make sure the stable power supply and DO NOT pull out the device during the programming.

Programming ECU in progress.

Read BDC2 key data completed.
Save key data.


Step 3: Write coding data
Read and confirm system info again.
Select coding data (according to the time, car vin). Select coding file ends withCoding.bin.

Prepare to program, make sure the stable power supply and DO NOT pull out the device during the programming.
Write coding data finished.
Save data.


III. Add Key
Go back to the previous step.
SelectAdd key function.
Select Bench method.

Connect ACDP, ICP interface board and BDC2 module.
Read system info.
Select BDC2 key data.
Select key data (according to the time, car vin). Select coding file ends withBdcData.bin.

Unplug the DB15 connector on the ACDP host, then connect the BAV-KEY adapter.
Put the working key into the BAV-KEY adapter. Then save original key info.


Put a blank key into BAV-KEY adapter.
Check the new key is an unlocked blank key.

Select an unused key position.
Write key.
Add key finished. Save new key info.


Take the working key out of car 3 meters away, put the new key close to the inductioncoil and long press the ignition switch fro 15s to learn key.

Install the BDC2 module back to car.
After the new key learning is completed, verify whether the functions of the original car key andthe new key are normal.

Posted by: jean at 07:46 AM | No Comments | Add Comment
Post contains 446 words, total size 6 kb.