I have read eeprom, modify eeprom and write eeprom modify withAutel IM608. After that replay clicking, try put original file and same problem and FEM not communicate, Anyone Help?

Posted by: jean at 06:00 AM | No Comments | Add Comment
Post contains 140 words, total size 3 kb.

Question:I have 2019 Toyota RAV4, I need to convert aVVDI smart keyto be programmed to the car. Can anyone help me to the right conversion onvvdi mini key tool?

Listen to experienced user suggestions:

1. Not Supported after 2018, you need OEM key. Now it is not supported, but maybe later (keep updating).

Better provide version board number to confirm with xhorse engineer.(Contact at:www.obdii365.com)

Xhorse XM smart key supported board numbers: 0020 3370 6601 0111 2110 5290 0031 0310 0182 7930 A433 0030 3330 7980 F433 0010(-part) F430 0780 0140

We give our suggestion: to useLonsdor K518ISE/K518SandLonsdor Toyota smart key

Image 3: Lonsdor FT08 PH0440B V2.0 RAV4 Avalon Camry 2018-2021Smart Key

Check this article guide:How to Program 2020 Toyota RAV4 All Keys Lost with Lonsdor K518ISE(to program all keys lost, need also Yearly AKL license subscription, please refer to this article)

2. The cheaper option is to useKH100+Lonsdor Board 0410b.

I give my feedback here:

Today I test on 2 SUV Toyota RAV4 and highlander Hybrid both 2021. Used the Lonsdor board 0410b and I emulated the start button using the KH100 to calculate data.

When emulating all door should be closed, use the board to gather the data off the start button. Press the start and hold the board near the button. The boards led light should blink when data is gathering.

Take the board to the KH100 that is on the net to transfer the data to get an emergency start. the whole thing takes less than 2 minutes.

Hope it helps!

Posted by: jean at 06:44 AM | No Comments | Add Comment
Post contains 263 words, total size 5 kb.

Latest Scania Diagnos & Programmer 3 SDP3 software application download free forScania VCI3heavy duty diagnostic scanner.

Posted by: jean at 08:45 AM | No Comments | Add Comment
Post contains 303 words, total size 5 kb.

Nissan Qashqai 2019 is programmed successfully without reading pincode or releasing steering lock withxtool x100 pad2.

it’s my first time programming Qashqai 2019 so I want to share the tip.

Didn’t read pin code, directly program key open driver door and close it then push the start button, wait 5 seconds and job done.

The key is original not generated.

The car is imported from Europe.

Here is the xtool x100 pad2 NISSAN Qashqai Function List V27.14 claimed by the manufacture.

1. Nissan Qashqai from China:

With smart key system (20 pincode): program smart keys.

Without smart key system (20pincode): program key

2. Nissan Qashqai from Europe:

2007 -2009: program remote – Fault code, erase DTC, program keys.

2009-2013: program remote – Erase DTC, program keys, release steering lock

2009-2013: Mechanical key – Erase DTC, program keys, release steering lock

2009-2013: Smart key system – program smart keys, erase all smart keys, program steering lock

2014 – : Immobilizer system – Type1 – program smart keys

2014 -: Immobilizer system – Type2 – program key

Good to know:

Obdstar X300 Pro4 / obdstar X300 DP Plus is also able to program Nissan Qashqai 2019 Prox all keys lost via obd.

Read procedure here:http://blog.obdii365.com/2021/12/09/obdstar-program-nissan-qashqai-2019-prox-all-keys-lost/

Posted by: jean at 06:46 AM | No Comments | Add Comment
Post contains 210 words, total size 4 kb.

New Arrival!Yanhua Mini ACDP MB 12-in-1 interface board adapter, working together withACDP main unitandModule 18Benz DME ISM Reflash, can refresh Mercedes-Benz CR4.XX/ CRD2.XX/ CR5/ ME9.7/ SMI271KE2.0/ CRD.11/ SIM271DE2.0/ CR3.XX/ SIM4LKE/ MED17.7X/ CR6/ SIM266 DME on bench.

It features in:

1: Mercedes-Benz dedicated interface, no wire separation, quick plug and unplug.

2: Automatically identifies and connects 12 models of Mercedes-Benz DME.

3: Pin automatic detection, safe and reliable, to avoid wiring errors damaging the circuit.

Image 1: Yanhua Mini ACDP MB 12-in-1 interface board adapter

Image 2: Interface board mode VS traditional methods.

Image 3:Module 18 Benz DME ISM Reflash

1. Support BenzISM Reflash
2. Support CR3.XX, CR4.XX, CR5, CR6, CR60.XX, SIM271DE2.0, SIM4LKE, SIM271KE2.0, CRD.11, CRD2.XX, ME9.7, MED17.7.X, SIM266 etc DME Reflash

Check: Yanhua ACDP renew DME/ISM with module 18(traditional method)

How doesYanhua Mini ACDP connect toMB 12-in-1 interface boardadapter on bench?

Step 1. Please prepare ACDP, adapter, interface board and DME.

Step 2. Connect the interface board correctly to the DME interface as shown.

Step 3. Short the CAN resistor on the adapter to the "CAN-R Join”.

Step 4. Connect ACDP, adapter, interface board and DME.

On bench refresh DME for Mercedes-Benz:

Open Mini ACDP APP, click on "Benz”.

Select "DME refresh”.

There are bunch of DME options including: CR3.XX, CR4.XX, CR5, CR60.XX, CRD.11, CRD2.XX, ME2.8, ME17.7, ME9.7, MED17.7.X, SIM266, SIM271DE2.0, SIM271KE2.0, SIM4LE, SIM4LKE etc.

Click one of DME option like SIM266, there are two options:

Interface board mode

Wiring mode.

We select ” Interface board mode” that is to use MB 12-in-1 interface board adapter.

Its function is to Identify and Refresh.

Note:

1.Please connect ACDP with DME properly;
2.Please don’t cut the power nor pull out the device during the operation.

And here is the ISM Refresh functions:

Identify

Refresh

Modify VIN

Note:

1.Please connect ACDP with ISM properly;

2.Please don’t cut the power nor pull out the device during the operation.

Yanhua ACDP Benz DEM / ISM Refresh with 12-in-1 interface board adapter tech support:www.obdii365.com

Posted by: jean at 07:46 AM | No Comments | Add Comment
Post contains 339 words, total size 13 kb.

How to program a new key for a 2014 Toyota Prius push start proximity all keys lost withxtool x100 pad(pad2/pad3) via OBD. The same procedure can be applied to Prius from year 2010 to 2018.

Select IMMO- Toyota- Key- By Vehicle- Prius- Proximity- 2010 to 2018- Reset Smart Key ecu (Smart Box)- Reste ECU (All keys lost)

Reset smart box takes about 16 minutes.

Reset smart box success

Select Program smart key after resetting

Put a new smart key to close the Start/Stop button

Program complete

Test new key

The new key can start the vehicle, remote control works as well.

Done.

http://www.key-programmer.org/2021/12/22/program-toyota-prius-2010-2018-all-keys-lost-with-xtool-x100-pad/

Posted by: jean at 03:51 AM | No Comments | Add Comment
Post contains 113 words, total size 12 kb.

Car model / year/ DME:2008 BMW 535i, want to install used MSD80

Question:How to read ISN from DME ? And how to read/write ISN to current CAS?

Method:

Option 1. Easiest was is to clone with original tools like ktag, flex or trasdata. That ecu is tricore password protected so you need better tools to read isn from it. Find someone local to you for the job.

Option 2. BMW specific key programming devices, CGDI, Yanhua ACDP, Autohex, VVDI BMW

check:Read/Write MSD80 MSD802 with VVDI, CGDI, Autohex or Yanhua ACDP

Option 3:CG AT-200will do the job in some minutes.

Watch this video tutorial on how to use CG AT200 to read write BMW MSD80 ECU and Clone Module offered by obdii365.com:

Good to know:

CG FC200, the upgraded version of AT200, comes with full authorization of AT200. And of course it can also read ISN from 2008 BMW 535i MSD80 DME, as well as more. So it is worth the money to have a try.

Posted by: jean at 08:32 AM | No Comments | Add Comment
Post contains 174 words, total size 2 kb.

Lonsdor updated the old FT11 H0410C Toyota and FT08-H0440C Lexus 8A smart key to the newPH0440B boards.

New board features:

• Default 312MHz/314MHz, fix frequency change bugs. Frequency can be changed to match to vehicles from different regions
• Fix bugs that failed to be programmed to some old 8A Toyota/Lexus models.

New Lonsdor FT08 PH0440B V2.0 Toyota Style Smart Key

Replace the oldFT11 H0410C board

optional key shell:3+1 buttons with logo

New Lonsdor FT02 PH0440B V1.2 Lexus Style Smart Key

Replace theFT08-H0440C board

optional key shell:3 buttons with logo

Lonsdor 8A smart key programming example:

Program 2020 Toyota RAV4 All Keys Lost with Lonsdor K518ISE

Posted by: jean at 07:37 AM | No Comments | Add Comment
Post contains 114 words, total size 3 kb.

Autel IM508, IM608 and IM608 Pro released a new update – reading immo data Audi bcm2 encrypted on December 14th, 2021.

IMMO_Audi Update
1. Adds Read IMMO Data (Encrypted) via Programmer function in Expert mode for IMMO 5 Audi A4/A5/Q5
2. Adds Read IMMO Data (Encrypted) via Programmer function in Expert mode for IMMO 5 Audi A6/A7/A8
3. Adds file template in Customize Commands function in Expert mode

Support versions:
0510, 0521, 0551, 0550, 0572, 0582, 0633, 0641, 0650, 0711

XP400/XP400 Pro andG boxare required.

Audi BCM2 encrypted (D70F3634/D70F3381) wiring diagram to IM508/IM608

Q: What diodes are needed for vpp2 and reset?

A: 120 ohm.

Posted by: jean at 05:51 AM | No Comments | Add Comment
Post contains 124 words, total size 4 kb.

GM MDI 2 GDS2Tech2win Software V2021.10.1 is available with pre-installed in Lenovo T410 Laptop I5 CPU 4GB Memory atobdii365.com. It is plug-and-play.

Look at the image below:

It includes one GM MDI2 multiple diagnostic interfaces, a Lenovo T410 Laptop with a preinstalled hard drive containing software Global TIS, GDS 2, Tech2Win V2021.10.1.

HDD Configuration:

500GB SATA HDD

Windows 7 64bit

Software Version:V2021.10.1

GM MDI Manager version:V8.3.103.39

Supports GM vehicles till 2022

Laptop Lenovo T410 I5 CPU Configuration:

Brand: Lenovo

Screen Size: 14.0

Memory: 4GB

Memory (RAM): Intel(R)Core(TM)I5 CPU

Type: Laptop/Notebook

Condition: Used

An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.

Primary Drive: DVD+/-RW Processor Speed: 2.53GHz

Processor Configuration: Dual Core

Good to know:

The above Wifi GM MDI 2 multiple diagnostic interface is good 1:1 in 2021.

GDS2 identifies it as an MDI2, not the MDI 1

Look at the PCBs of Wifi GM MDI 2:

The advantages to purchaseGM MDI 2GDS2 Tech2win Software V2021.10.1 with pre-installed:

-Ready to use, don’t bother to download and install by yourself.

-Save money when purchasing together.

-It is working stable for the few times our customers tested. tech2win works too

– is applicable through 2021 vehicles with no activation for users.

–The HDD has many different packages to install as needed.

-SPS online programming was test by many without issue

-GDS2 Multi-Languages available: English, French, German,Italian.etc. Total 30 languages to choose

Tech2win: English only

– Online programming:confirmed by purchasing extra OriginalGM Online Programming Software Subscription

Read related article:GM MDI2 Clone SPS programming ECM (update, Setup etc)

– GM MDI 2 clone iscompatible with original GDS2 software.

For the using tips and users’ feedback, browse here:http://blog.obdii365.com/2021/01/19/gm-mdi-2-clone-is-compatible-with-original-gds2/

What can Tech2Win and GDS2 do?

Read the related articles:

1. Tech2Win USA GM Car list
2. GM MDI GDS2 Vehicle List with Test report

Enjoy!

Posted by: jean at 09:23 AM | No Comments | Add Comment
Post contains 322 words, total size 7 kb.