KT200 New Software 2022.10.01 Update Feature

Good news!KT200/KTM200/ECUTuner ecu programmer released new big update on Sep. 2022.

KT200 NEW AUTOMATIC FUNCTION: TRICORE CLONE

NEWS

 

NEW AUTOMATIC FUNCTION: TRICORE CLONE

Added automatism to clone the following control units with OTP zone adaptation and password:

 

–MED17.5AUDI

– MED17.5.25 AUDI

– MEVD17.4.2 CITROEN

– EDC17 C08HYUNDAI

– EDC17 C53HYUNDAI

– EDC17 C08 KIA

– EDC17 C53 KIA

– EDC17 C66 MERCEDES BENZ

– MEVD17.4.2 PEUGEOT

– MED17.5 SEAT

– MED17.5.25 SEAT

– MED17.5 SKODA

– MED17.5.25SKODA

– ME17.9.20 SMART

– EDC17 C73 TOYOTA

– MED17.5 VOLKSWAGEN

– MED17.5.25VOLKSWAGEN

 

 

KT200NEW FULL SYSTEM FOR MERCEDES TRUCK AND CLAAS CONTINENTAL ACM/MCM

– FULL SYSTEM FOR CONTINENTAL ACM / MCM MERCEDES TRUCK AND CLAAS

Until now, the K-line MCM2 D1/D2 and ACM versions were supported.

Full reading of MCM2.1 D3/D4 and ACM2.1 in CAN line is now also available.

 

–Reading and writing Micro

–Reading and writingEEPROM

– Recovery

– Checksum

 

To enable full system communication in D4 hardware versions, it will be necessary to

perform simple unlocking operations with the control unit open by performing bridges on the PCB.

At the end it will be possible to close the control unit and read and write all the contents from the pinout.

Follow the instructions in the operating manuals.

 

 

PSA HYBRID4 HV17.4

– BENCH MODE PER CENTRALINE PSAHYBRID4HV17.4

Full reading of Citroen/Peugeot HYBRID4 ECUs via pinout added.

The ECU has 2 internal HCUs.

–Reading and writingMicroHCU1 / HCU2

–Reading and writingEEPROMHCU1 / HCU2

– Recovery

– Checksum

 

 

 

BOOT MODE (BAM) for EMS S8 e CRD2

News

 

 

We have added new BOOT MODE (BAM) for complete control unit management on SCANIA:

– CONTINENTAL EMS S8

and new BOOT MODE (BAM) for MERCEDES BENZ / FCA with control units:

–DELPHI CRD2.xx (Versioni SOLENOID e PIEZOTEC)

 

This makes reading and writing ECU in open mode easier

compared to the previous JTAG mode (JTAG function still available).

Furthermore, with this method, it’s no longer necessary for Delphi CRD2.xx SOLENOIDs to open the ECU from the underside.

 

– Reading Micro + Eeprom

– WritingMicro + Eeprom

– Recovery

– Checksum

 

 

 

 

NEW AUTOMATIC FUNCTION: TRICORE CLONE

NEWS

 

NEW AUTOMATIC FUNCTION: TRICORE CLONE

Added automatism to clone the following control units with OTP zone adaptation and password:

 

– BMW MEVD17.2.8

– BMW MEVD17.2.H

– FIAT DCU17 PC42

– MERCEDES BENZ EDC17 CP10

– MERCEDES DCU17 PC42

– MINI MEVD17.2.8

– MINI MEVD17.2.H

– RENAULT DCU17 PC42

– VOLVO EDC17 CP48

CONTINENTAL GPEC2, GPEC3, GPEC4, GPEC4LM !

News

 

 

New BOOT MODE (BAM) for ECUs CONTINENTAL GPEC

fitted on vehiclesFCA FIAT, JEEP, CHRYSLER, DODGE:

 

– CONTINENTAL GPEC2A

– CONTINENTAL GPEC3

– CONTINENTAL GPEC4

– CONTINENTAL GPEC4LM

 

– Reading Micro + Eeprom

– WritingMicro + Eeprom

– Recovery

– Checksum

 

 

CUMMINS CM2200 DODGE CHRYSLER

News

 

 

Added JTAG MODE for control unit CONTINENTAL CUMMINS CM2200 for vehicles DODGE and CHRYSLER

 

– Reading

– Writing

– Recovery

– Checksum

 

 

NEW BOOT MODES FOR DELPHI DCM7.1 A/B PSA

News

– BOOT MODE SOLUTION FOR DELPHI ECU DCM7.1A / DCM7.1B

 

Added NEW BOOT MODE for micro AURIX TC297 for ECUs DCM7.1A and DCM7.1B mounted on PSA group cars.

 

– Reading

– Writing

– Recovery

– Checksum

 

 

Updates for JTAG – BENCH – OBD

News

 

 

– NEW BOOT VIA PINOUT FOR MITSUBISHI OUTLANDER 2.0 PETROL

– Read and write

– Recovery

– Checksum

 

 

 

Added JTAG mode for ADBLUE ACM VOLVO TRUCKS EURO 6 control unit

– Read

– Writing

– Recovery

– Checksum

 

 

Added to the OBD driver for MARELLI 9DF FCA also the VIRTUAL reading,

in addition to the real reading already present.

 

* EXCLUSIVE! – FULL SYSTEM for MARELLI 9GF and 8GSW sw version fromKT200 2020

News

– FULL SYSTEM MARELLI 9GF for software version from 2020

– FULL SYSTEM MARELLI 8GSW for software version from 2020

 

Added new full system drivers for MARELLI 9GF and MARELLI 8GSW control units

for versions with software update blocked since 2020.

On these control units with updated software was no longer

allowed the complete reading of micro and eeprom from pinout.

Is now possible: read and write the complete content without opening the control unit.

 

– Reading and writing Micro

–Reading and writingEEPROM

– Recovery

– Checksum

https://www.obdii365.com/upload/pro/22093016645232305438.pdf

Posted by: jean at 07:38 AM | No Comments | Add Comment
Post contains 750 words, total size 15 kb.

CG FC200 Device Activation Time remain 0 Solution

How to activate CG FC200 software if software update subscription license expires?

If software license expires, users cannot activate it online.

Follow steps below to activate FC200 software.
Open online store icon, press this icon several times.

Then exit and run FC200 software again.
If says network abnormal, change to a more stable network connection.

The software has been activated again.

https://www.obdii365.com/service/activate-cf-fc200-if-license-expires.html

Posted by: jean at 06:21 AM | No Comments | Add Comment
Post contains 70 words, total size 4 kb.

How to Use Digiprog3 to Change Nissan Navara Mileage

This helps if you need to correct mileage ona Nissan d40 navara.

Device to use:digiprog3mileage programmer

Plug: 48

Solder the colored cables of Plug 48 to the suitable points

Nissan Navara HCS12

Connect DigiProg to separate electricity supply

ConnectDigiProg 3with the plug

Follow the instructions of the DigiProg

Choose program: PKW/LKW—Nissan-Navara-HCS12

Posted by: jean at 06:41 AM | No Comments | Add Comment
Post contains 60 words, total size 5 kb.

How to Add Toyota Tundra 2016 Key with Mini VCI?

How to use Mini VCI ToyotaTechstream V12 software to program a new key for Toyota Tundra 2016.

 

Procedures:

ConnectMINI VCI cableto Toyota Tundra obd port,then run Techstream software

And click "Connect to Vehicle”button at right side menu

Confirm the vehicle information and press Next

After then click "Immobiliser”

Click "Utility”

Then select desired utility "Key Registration”option and press Next button.

Posted by: jean at 06:42 AM | No Comments | Add Comment
Post contains 96 words, total size 5 kb.

Can I use SVCI J2534 with Renault CAN CLip?

We have discussed Renault CAN Clip Yes and No passthru interface before. Polish users found it also can be used with STICSVCI J2534passthru adapter.

 

Here comes the free Renault CAN Clip V220 for svci

 

VM Windows 10 PPRO X64 PL Renault Can Clip V220 + ReProg V191 for STIC SVCI J2534

https://mega.nz/file/WQ5X3ZDS#wHWSI5oooBkZt2HZSl6wf0c2kKQxBe7SjWiifkAM7XA

 

(password: cswm2022)

Image Windows 10 PRO x64 Polish language.

Installed and activated Renault Can Clip V220 prepared to work with STIC SVCI J2534 interface as pass thru.

Iso reprog v191 image left on desktop.

Renault Clip Tool By Mr Rorry is also included in the system.

The image was prepared using VMware Workstation 16 Pro version 16.2.3 build-19376536
English version should be launched soon.

The installation is adapted to work with this device

 

 

STIC SVCI J2534

Posted by: jean at 08:38 AM | No Comments | Add Comment
Post contains 191 words, total size 3 kb.

How to use KT200 to Read and Write PSA MD1CS003?

PSA MD1CS003 perfect work withKT200 ecu programmer.

 

 

Pinout Bosch MD1CS003 TC298TP Peugeot Citroen Diesel

 

Set up bench connection follow the wiring diagram

 

 

Read data very fast

 

 

Writing flash

Checksum correction ok

KT200Write flash successfully

 

Posted by: jean at 06:59 AM | No Comments | Add Comment
Post contains 44 words, total size 8 kb.

Free Download 2022.07 2022.08 GM GDS2 Software

Free Download GM GDS2 Global Diagnostic System 2022.05 & 2022.07 software.

 

 

V2022.05 GM GDS2

 

Date: May 2022

Version: V2022.05

Operating system: Windows 7- Windows 10 (32 bit) native install

Device affected:vxdiag vcx nano gm/opel wifi/usbdevice as well as other vxdiag scanners

Safety: 100% safe

 

GDS2 2022.05 Native Install

GDS2 V2022.05

incl. GDS2 patch and GM VCI manager

Tech2win 16.02.24

VX Manager 1.8.9

 

Database version:

GM China V2022.06.0

GM Global V2022.05.0

Opel/Vauxhall V2020.1

Sabb V2020.4

VINFAST V2021.4

 

 

V2022.07 GM GDS2

Date: July 2022

Version: V2022.07

Operating system: Windows 7- Windows 11 (32 bit/64bit) native install

Win 7, 8, 8.1, 10 and 11 32 or 64 bits
Win 10 64 bits very good choice.

Interface affected: GM MDI,MDI2, Bosch Opel interface

Safety: Unknown, You are at your risk.

 

GM GDS2 FREE NATIVE INSTALL 07.2022

All you need is here with baby steps 0->9:

https://disk.yandex.ru/d/df9OyF2NgdF3Kw

Password: Fantomel

 

All packages are noted for order of install, from 0->9, done so that even a little baby can do it.Files are uploaded in yandex. if you can’t download them, open a free account with 3 clicks, import the packages to your new account and download them from there.

 

Here is bonus

GDS2 Deliverables 08.2022 EU

Here you have EU Deliverables for 08.2022 . Keep in mind that GM EU or PSA it is very slow on updates and in general they say release date is 2020.

https://disk.yandex.com/d/zUTSydLuE0FUZQ

Password: Fantomel

Posted by: jean at 07:52 AM | No Comments | Add Comment
Post contains 292 words, total size 6 kb.

How to Flash Autel KM100 Firmware by Files?

One of our customers’Autel MaxiIM KM100device automatically restarts every 5-10 minutes, in this case he will need a firmware reflash.

 

 

Free Download Autel KM100 flash files

https://we.tl/t-gzlwQ6YhHI

Installation instructions are mentioned, along with the boot files.

​Unzip this file and put it under the root directory>>Insert the SD card back into the device>>Reboot the device.

 

If still not working after flash firmware, need to send back device for repair.

Posted by: jean at 07:13 AM | No Comments | Add Comment
Post contains 77 words, total size 3 kb.

Will Lonsdor K518ISE Program Toyota 2022 All Keys Lost?

WillLonsdor K518ISEprogram Toyota 2022 smart keys, i.e Land cruiser 2022 add key and all keys lost? If yes, what key to use? original key, aftermarket key or must beLonsdor key?

 

Here’s the clue:

 

 

Check the P04 page of the smart key, if P4 ends with BABA or 3939, Lonsdor cannot do all keys lost, only add key.

If P04 page is not BABA or 3939, Londsor will do both add key and all keys lost.

All keys lost requiresADP adapter and LKE emulator. Generate LKE emulator and add key. You can use either OEM, aftermarket or Lonsdor keys as well as key board is correct.

 

Example:

Program 2018-2022 Toyota Camry 8A All Keys Lost by Lonsdor ADP Adapter

Program Toyota RAV4 2021 All Keys Lost with Lonsdor K518 & ADP Adapter

Lonsdor K518ISE Adds Toyota Corolla 2021 4A Key with ADP Adapter

Posted by: jean at 06:10 AM | No Comments | Add Comment
Post contains 151 words, total size 3 kb.

How to Solve Dodge RAM 2013 Key Not Working After Programming?

Here comes the problem:

I added a smart key ( after market) withautel im608in my boss truck 2013 Dodge ram 1500 and it did work for 4 days. Today I added a new one ( also after market) and it worked for 3 hours. Scan systems and show the next code B1A0B-00… any help would be greatly appreciated.

 

 

Solution:

Your problem is the key. It happened to me a couple of times already with unlocked and chinese keys.

This happens VERY often when using aftermarket or Universal keys. They often never lock and very often fail.

B1AOB Faulty Totally Integrated Power Module (TIPM) or The auto market key is defective, you should buy good companies like Xhorse or original.

You can use one from keydiy or XHORSE they work fine.

Just use axhorse keywill go straight in. But better use Oem and you can’t have any keys near when your programming the key.

That’s a very common problem on that model, 2013 have an issue about RFH module, every time you tried key lock and then after some starting process it will unlock, you can program a Xhorse key and it never unlock it again or you can update the RFH on Witech 2.0 this should fix the problem.

Posted by: jean at 07:29 AM | No Comments | Add Comment
Post contains 220 words, total size 4 kb.