How to program all smart keys lost on Nissan Patrol 2024 usingAutel km10If you are usingobdstarjust choose 2013+ it can program 2024 Nissan patrol and armada smart key. By autel km100 just choose 4 pin can program key.

Procedure:

Go to System Selection->4-digit PIN

Scanning vehicle system
Select Remote Control Learning-> Smart Key Learning

Turn on hazard switch.
Turn off ignition switch or power switch.
Open and close door once.
This procedure erases all registered key ID.

Press push button ignition switch for 2 seconds or more and turn ignition switch to the ON position.

Turn off ignition.

Press push button once, attach the smart key that needs to be programmed to the push start button.
Check if the instrument turns on automatically. Press Yes it turns on.

Key programmed successfully. Program Next key.

Turn off ignition.

Press push button once, attach the 2nd smart key that needs to be programmed to the push start button.

Key programming completed.

Open and close the door once, click the Unlock and Lock key once, start the engine and wait for 5 seconds.

Both keys work fine.

www.obdii365.com

Posted by: jean at 08:50 AM | No Comments | Add Comment
Post contains 219 words, total size 8 kb.

If your foxflash/kess3/fc200/xhorse multi progprogrammer etc failed to correct checksum for ECUs, you can correct the checksum manually with L-suite software.

Let’s calculate checksums the easy way.

L-suite won’t do checksums on all ecus, but the common ones are easy to sort out with proper quick software.

So let’s begin, start by downloading Lsuite software from

Free Download L-Suite DLL Checksum Calculator

It’s about 11mb, unzip it anywhere you like. Desktop or wherever.

Then we install vcredist_86.exe on that zip archive.
Time to start Lsuite, first time opened it asks.

Please choose dlls folder location. It uses Kess checksum calculating DLL library files.

Nice, now press run and it will calculate checksums, on some cases it wants to compare your modfile to original bin. If so then just select where that ori file is.
Let tool calculate and end result identification.
It will save that now checksumed file on same location where modfile was.

Now you can write file in and if tool asks to calculate cs, just select no.

www.obdii365.com

Posted by: jean at 07:28 AM | No Comments | Add Comment
Post contains 234 words, total size 5 kb.

What cable is needed to stop the active alarm on a ford with theAutel im508orim608?

Autel usesgbox2/gbox3and you manually do the disconnecting and reconnecting.

How to use Gbox to disable active alarm?

Leave ground connected, then 1 wire from battery + to gbox then 1 wire from battery + terminal to gbox.
the tool controls power then.

The + from battery goes to the GBOX2, and the battery post connector goes to the GBOX2 also.
THE POWER IS GOING TO THE GBOX2 FROM THE BATTERY!! . GUESS WHAT THE GBOX2 IS PLUGGED INTO? THE OBD PORT!!! .

Power from the battery goes to the gbox2, which gives power to the obd port. Gbox OBD connections are really tight.
The tools makes the connection of power and disables the alarm before it activates.

The tool switches the vehicle power on and off, its the whole entire purpose of using the Gbox2.

The gbox2 is acting as a switch to power on the vehicle. The whole entire purpose of using the Gbox2 is so the tool can control power to the vehicle.

Connection example:

2020 Ford F550 all keys lost with active alarm.

Autel really sucks at doing active alarm, I have been successful with it but it’s a headache. Roughly 20 mins of connecting and disconnecting battery.

Autel really needs to just make a real ford bypass cable. Other tools out have bypass cable setup that works great.

Posted by: jean at 07:00 AM | No Comments | Add Comment
Post contains 248 words, total size 3 kb.

Lonsdor released a newBlue version KH100+remote maker. What is the difference between the Blue andBlack KH100+?

The Blue KH100+ comes with 4 free universal remotes. Black version does not.

The Blue version adds Indian vehicle database forTATA Mahindra Maruti. The black one does not.

Apart from that, function is the same.

www.obdii365.com

Posted by: jean at 07:00 AM | No Comments | Add Comment
Post contains 59 words, total size 1 kb.

Here we listed top 6 tools that are possible to read and write VAG MQB RH850 clusters to program keys or correct mileage. Check the chip (processor) list, function, vehicle coverage or demo instructions of each tool.

1. Xhorse Tools

Compatible devices:VVDI Key Tool Plus,Multi Prog(make dealer key and learn key with vvdi2).

To read MQB RH850 clusters, you need to activateMQB licenseto the key tool plus. Multi prog has the MQB license built-in. Just combine it with key tool plus or vvdi2 to activate it.

VVDI Prog only reads MQB NEC35XX, it will not read MQB RH850.

Key Tool Plus and Multi Prog use different RH850/V850 adapters.

RH850 adapter for multi prog

RH850 adapter for key tool plus

No need to cut wire or lift pin to read MQB48/MQB49/5C dashboards.

Supported Dashboard List
VW 4th Gen Johnson Controls 34xx series
MQB-RH850(R7F)series
MQB 34xx series

Function:

Add key for MQB-V850/RH850Series

MQB-V850/RH850 Mileage Correction

All Keys lost (Need sync data)

Suppported Processors:
D70F3426
D70F3524
D70F3525
D70F3526
D70F3529
D70F3532
D70F3537
R70F01401
R70F01402
R70F01407

Video Instructions

2. Autel MaxiIM Tools

Compatible tools:

Autel IM508IM508SIM608IM608 Pro(with XP400 Pro).

To read MQB RH850 cluster you also need to buy theAPB131 adapter.

APB131 replaces the APB130 (APB130 only for MQB V850).

Function

• Adds Key for VW MQB NEC35XX.
• Add Keyfor MQB-V850/RH850Series
• READ IMMO DATA FROM MQB-V850/RH850DASHBOARD

VW (Add Keys):
Arteon 2017-2021, Golf 2013-2021, Passat 2015-2021, Polo2015-2021, Tiguan 2018-2021, Touran2016-2022, Jetta2018-2021, T-Roc2018-2021, Touareg 2010-2018

Audi (Add Keys):
A1 2019-2021, A3 2021-2021, A4 2008-2016, A5 2008-2016, A6 2011-2019, A7 2011-2019, A8 2010-2017, Q22017-2021, Q32019-2021, Q5 2009-2017

Skoda (Add Keys):
Octavia2013-2021, Fabia2015-2021, Superb2015-2021, Kodiaq2017-2021, Kamiq2020-2021 , Rapid2013-2021

Seat (Add Keys):
Arona2018-2021, Ateca2017-2021, Ibiza2018-2021, Leon2013-2021, Tarraco 2019-2021, Toledo2013-2019

SUPPORTED CHIP TYPE LIST:
D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3535, D70F3537, D70F3426, D70F3381, D70F3382, D70F3634, D70F3635
R7F701401, R7F701402, R7F701407

No lift pin or cut wire. Need soldering. MaxiIM tools will show you wiring diagrams. Some clusters need to remove resistors. Autel does not write mileage for RH850, only for IMMO purposes.

Read also:

Autel APB131 vs Keydiy vs Xhorse MQB RH850 Adapter

3. Yanhua Mini ACDP

Yanhua ACDP released newmodule 34for MQB RH850 IMMO and mileage. The module 34 is compatible with both ACDP-1 and ACDP-2 Master.

Function:

IMMO4 D70F3423/D70F3426 chip immo key programming and mileage correction.

R7F71401, R7F71402, R7F71407 5A RH850 cluster immo key programming and mileage correction.

R7F71401, R7F71402, R7F71404, R7F71406, R7F71407 5C meters mileage correction. (Only mileage function on 5C clusters)

Feature:

No removing components.
No lifting pins.
No wring.
No hurt on cluster.

No Soldering.

Chip List:

D70F3423
D70F3426
R7F714011
R7F71402
R7F71404
R7F71406
R7F71407

With ACDP module 34, you don’t need to solder or remove components.

How to Install Yanhua ACDP Module 34 MQB RH850 Interface Boards?

4. CGDI CG100X

CG100Xadds VW MQB R7F7014xx mileage repair since version 1.4.1.0.

MQB RH850 Chip list:

R7F701401

R7F701402

R7F701407

Function:

Mileage correction

CG100X will read immo data for RH850 clusters, only for mileage purposes.

Supported MQB R7F7014xx car models:

Volkswagen Passat, Magotan, T-ROC, TAYRON, Bora, Sagitar, THARU, Teramont, Tiguan,Lamando, CC, Golf, etc. Check:CG100X MQB Mileage Correct Car List

You will need to use theD1 adapterfor CG100X.

Remove these components.
Do not extend the wire harness of the D1 adapter.

Example:

CG100X 2019 VW Tiguan MQB RH850 R7F701407 Mileage Correction

5: AVDI MQB RH850

with License VN021 and VN023.

The VN021 license allows extracting theImmobilizer data from dump of RH850 processors, used in VAG MQB dashboards with Megamos-AES keys.Upon reading the RH850 processor using the ABRITES Programmer, CS, MAC, Keys, and PowerClass information is visualised in the software.

Functionalities:

• Reading Immo data from dump of RH850/V850 processors in VAG MQB dashboards
• Writing Immo data on RH850/V850 processors in VAG MQB dashboards
• Mileage recalibration, including RH850 dashboards (for replacement purposes)
• Spare key addition
• Instrument cluster exchange
• Retrofit

Supported vehicles:

VAG vehicles with the following dashboards

• VDO MQB Analogue RH850
• VDO MQB Virtual Cockpit RH850
• VDO MQB Analogue V850
• VDO MQB Virtual Cockpit V850
• JCI MQB Analogue V850

The VN023 license is intended for working with the ABRITES RH850/V850 Programmer which allows changes the mileage in Visteon and JCI dashboads, equipped with RH850 processors. This functionality is suitable for VAG MQB vehicles (Volkswagen, Audi, Seat, Skoda and other VAG vehicles on the same platform).

Functionalities:

• RH850 processor odometer writing in Visteon/JCI dashboards

Supported vehicles:

• All VW/Seat/Skoda/Audi models with Visteon/JCI dashboard with RH850

When working with these processors, make sure to follow the wiring diagrams available in the software!

6. PolDiag

The PolDiag MQB RH850 is a globally unique tool offering advanced functionalities for reading, decoding, modifying, andwritingback data for MQB RH850 clusters. Its capability to work with clusters integrated with bothIMMO 5A and IMMO 5Cplaces it at the forefront of automotive technology.

Key Features for Clusters with IMMO 5A:

• Comprehensive Reading and Decoding: Ability to read and decode IMMO data, including Component Security, VIN, PIN, Power Class, keys, mileage, and more.
• Advanced Modification and Writing: Unique capability to modify IMMO data and write the modified data back to the processor.

Key Features for Clusters with IMMO 5C:

• Specialization in Mileage Correction: Reading and decoding mileage, enabling its modification and the writing of changes to the processor.

MQB RH850 MILEAGE Function

MQB RH850 IMMO 5A Function

Read more:

VAG MQB RH850 Cluster 5A vs 5C

Posted by: jean at 07:47 AM | No Comments | Add Comment
Post contains 1086 words, total size 24 kb.

Problem:

Can you help me clone this remote? Mini cooper 2002. What kind ofxhorse remoteto use?

Here is the clue.

You can't clone this remote.

You cannot clone. Generate anXhorse keyand then write the given codes with ista or launch. That is how you would be able to teach the remote.

not possible clone key/not possible clone remote.

You have to generate the new control and program in car. Bar code required for central locking, EWS out for transponder.

Program via OBD to enter bar code and synchronization manual. You cannot program without a code on the remote. Using SmartPro Silca for this car.
When the SmartPro is plugged in the car, it pull the pin.

I had success with this 2003 Mini Cooper S, like this:
After programming with Smartpro, start the engine, open and close the door and press the close or open button for 15 s.

www.obdii365.com

Posted by: jean at 09:06 AM | No Comments | Add Comment
Post contains 157 words, total size 4 kb.

GM OEM Software with Topdon RLink X7 Connection Instructions.

First of all, followthe instructionsto install and activate Rlink X7 J2534.

Then Log in to the RLink Platform software.

Click Drivers > Driver Download. (To avoid driver incompatibility, do not download drivers that are not related to the OEM software.)

Install GM driver


Select Rlink mode.

Double click the icon to open the GDS2.

Choose RLink driver mode following the order below

Posted by: jean at 07:37 AM | No Comments | Add Comment
Post contains 81 words, total size 2 kb.

How to find pin code from Siemens SID807 ECU for the Peugeot Citroen group via dump?

First of all, you need a full read. No virtual reading with kess/foxflash etc. Full read with pcmflash/foxflash/kess3/flex etc.

You can find the pin code in thempc dump(not on the eeprom).

Hex solution to find pin open SID807_IntFl and enjoy.

If it does not show the pin code, your file may damaged.

www.obdii365.com

Posted by: jean at 07:32 AM | No Comments | Add Comment
Post contains 78 words, total size 2 kb.

One of MHHAUTO experts points out how to tell different Mongoose JLR clone interfaces and fix connection issue.

Credit to supra2jz from MH forum. Just for sharing purposes.

1. How toidentify the Mongoose Pro JLRclone cables? Which one is better?

Few years ago, the Mongoose Pro JLR clones available online were an exact clone (almost) of the original Mongoose Pro and everything works perfect with stable connection to the vehicle. Recently, from the end of 2022 the clone devices selling online are with a completely different PCB and elements inside, there is no ATMEL chip anymore and the new replacement one comes in BGA package (instead of QFP).

You can tell the difference from the PCB.

PCB comparison:Original Mongoose Pro JLR vs 100% good clone mongoose Pro vs 2023 mongoose pro vs 2024 Mongoose pro

The cheap clones still work perfectly fine using the original Mongoose Pro JLR drivers, however there is a problem with the vehicle connection. This is especially occurring working with Toyota/Lexus cars with Techstream leading to the "Unable to connect to VIM” error. This is not a software or driver problem (re-installing everything will not fix it) – this is a clone device design problem and the solution is really simple.

2. How to fix the Mongoose JLR Pro clone?

All you need to do is to connect the "Chassis Ground” and "Signal Ground” pins together (4 and 5 pin)– as seen in the photo, it can be done like that with just a piece of wire or more professional way – with a jumper, so if needed it can be switched ON/OFF (depends on the application and working condition).

Fix worked and users are able to read MS-CAN and HS-CAN with a recent mongoose clone from china.

3. Is there a good replacement for Mongoose JLR Pro clones?

Yes,VXDIAG VCX SE,Xhorse MVCI Pro, Openport andGodiag J2534are good replacement of Mongoose JLR pro clones.

mongoose cable clone (the mangoose cable) is dangerous for reprograming. It will not properly program module nor program keys. But it is recommended and stable version for JLR beginners or DIYers.

If you are working on a MY18+ vehicle then you will need a suitable interface either the JLR Bosch DOIP orVCX SE DoIP VCI. VCX SE is the approved j2534 interface that allows you to do online programming via online account. It can also be used as a J2534 passthru device for OEM diagnostic program ODIS, techstream , Xentry passthru etc.

Posted by: jean at 09:10 AM | No Comments | Add Comment
Post contains 418 words, total size 7 kb.

What is the VIN/Odometer Check feature of Autel MaxiSys diagnostic scanners?

"VIN/Odometer Check” feature supports reading the mileage and Vehicle Identification Number (VIN) values stored in various control units of the vehicle.
By comparing the values, it servers as reference infomration for the maintenance history of the vehiclemodule.

What Autel MaxiSys scanner support this feature?

Supported Devices:
Our VIN/Odometer Check feature is seamlessly integrated into the following Autel devices:
Autel MaxiSys Ultra,Ultra EV, Ultra ADAS, MS919,MS909, MS909EV,MS908SP II, MS908S II, MS908S3,MS906Pro,MS906Pro-TS,MaxiIM IM608Pro II

Who will benefit from the feature?

Car Buyers:Know the history of your potential purchase! Insist on a VIN or VIN/Odometer Check before buying a used car. Our Autel tools can uncover hidden issues like replaced parts or tampered mileage. Protect yourself from scams!

Car Repair Shops:Expand your services and boost customer trust with VIN and VIN/Odometer Checks. Identify potential problems, verify mileage accuracy, and attract more customers to your shop.

these features will provide you with：
1. VIN/Odometer Check:Our latest feature allows you to effortlessly read the mileage and Vehicle Identification Number (VIN) values stored in various control units of the vehicle. Whether you’re a seasoned mechanic or an automotive enthusiast, this tool provides invaluable reference information for the maintenance history of the vehicle module.
2. Enhanced Maintenance Insight:By comparing the values retrieved, you gain deeper insights into the vehicle’s maintenance history, empowering you to make informed decisions and provide superior service to your customers.

Posted by: jean at 08:43 AM | No Comments | Add Comment
Post contains 245 words, total size 3 kb.