August 30, 2019
Q: How to make esys read the psdzdata from the Rheingold?
A:
You can do that with mklink.
Let's assume that the PSdZ data are located at Rheingold under C:\WINDOWS\system32>mklink\ C:\ Program Files (x86) \ Rheingold\ PSdZ\data_swi \ psdzdata
As an administrator, you open the CMD console.
open CMD with admin rights
mklink /d C:\Data\psdzdata "C:\Program Files (x86)\Rheingold\PSdZ\data_swi\psdzdata"
copy this command if your
Esys Data path is C:\Data and your Rheingold Path C:\Program Files (x86)\Rheingold\
Through this action, the PSdZ data of Rheingold for E-SYS are now firmly linked.
Posted by: jean at
07:08 AM
| No Comments
| Add Comment
Post contains 98 words, total size 1 kb.
August 09, 2019
Credit to Mr.Dolatowski
CGDI ask to downgrade the current CAS version
Make sure the car has enough power supply and don't disconnectcgdi progduring the programming process.
the most important voltage I set to14.03 voltit was my second attempt the first time I did without a power supply and I detained cas fortunately I had a backup eeprom and flash. After that you do as in the movie when the program tells you to remove the key, pull it out and just wait and must do the downgrade.
I do not use a laboratory power supply or a computer power supply, onlya specialized power supplywhich gives voltage and about 80 Amperes under the ista P, for this I do not do it on the table but connected everything in the car. Backup your eeprom and flash and you can go ahead and try if you don't do it, upload original eeprom flash and get back on your feet. This is not a fiction but a reality.
See photo attachments
Downgrade CAS3 success
Save data.
www.obdii365.com
Posted by: jean at
05:56 AM
| No Comments
| Add Comment
Post contains 191 words, total size 6 kb.
32 queries taking 0.2366 seconds, 168 records returned.
Powered by Minx 1.1.6c-pink.