I have an all keys lost 2013 mercedes e350 with the proximity smart key. I’ve read not to put a battery until the end.

 

It worked! I initially went under on vehicle G-Box fast and it said it couldn’t do it so then I went to All keys lost regularly in vehicle and it got the password very quickly but it never asked me if it was a smart key so I I thought it wasn’t going to work but it worked fine I put in the battery after a programmed and went to test it out after a minute.

I found these keys work most likely on later years

Did myself 12,13 S class

12,13 Gl class

C class 2014 as well

E class 2010/11 no work

C class 2009-2011 no work

Keyless go function work/ no work based on EIS version and NOT by chassis code.

I can tell that as much as the car newer more likely chances to work.

Posted by: jean at 05:52 AM | No Comments | Add Comment
Post contains 213 words, total size 5 kb.

ThePCMTuneris the same as KTM200 KTM 100 and KTMBench clone?

No, they are different.KTM200 is a clone of the original device. PCMtuner has its own software. Supply tuner account, supply WinNOLS damoas. Supply VR files, KTM200 never can do these.

Check the comparison below:

Hardware:

KTM200and KTMBench use self-designed hardware and USB dongle. Manufactured in China.

PCMTuner hardware and smart dongle are designed by a group of UK tuners. Originate in the UK, manufactured in China. Better quality and more suitable for tuners.

KTM200

KTMBench

PCMTuner

Software:

KTM series (KTM200, KTM100, KTMBench, KTMOBD, KTMFlash) are simple copies of OEM pcm-flash. The new KTM200 uses crack USB dongle with origianl pcm-flash v1.20 with 67 modules.

PCMTuner has its own software which is similar to Autotuner. They know what tuner want. Software not only for read and write, but can supply more solutions for you when you have the tool. They give more support for all legal users.

PCM Tuner v1.21comes with integrated scanmatik2, supports original scanmatik2 pro feature. KTM does not.

The biggest difference between KTM and PCMTuner is that the laterhas tuner account for users to download VR files, winOLS damaos, map packs and has lots of benefits, KTM200 does not.

Check:PCMTuner Tuner Account

Activation/Registration

KTM200 does not need activtaion.

PCMTuner you need to provide the serial number to activate and register with tuner account.

Update:

KTM200 can be only updated by purchasing a new version USB dongle.

PCMTuner they say can be updated. Free update. No subscription, no annual fee.

USB Dongle

Both come with a USB dongle. pcmtuner dongle has better compatibility.

You can use the PCMTuner smart dongle with KTM series devices, but KTM dongle cannot be used with PCMTuner.

Both allow updating old KTM series to a newer version by new dongle.

Buy thepcmtuner donglealone can also get software and account.

Posted by: jean at 07:42 AM | No Comments | Add Comment
Post contains 311 words, total size 5 kb.

Here is the collection of software from Fantomel for diagnosing electronic equipment of Opel/Vauxhall cars from 1987 to 2021.

• Year / Release date:2021
• Version:200603a
• Interface language: English
• Activator: Not needed
• Installation files size:155.9MB

Firmware:1.41/1.64/1.66/1.67(OCFlash 1.0 – interface flashing tool)

Free download opcom 200603a torrent

https://mega.nz/file/i35jgCoY#4IrMo9c0ykw_hFA-FwJMchxftoST_TmwYj85GVO2kO4

or here

https://rapidshare.io/4md/OP-COM_Multi_by_Fantomel.zip

No Password.

if your device does not have pic18F458 chip, please choose ourdevice+software. Otherwise it will not work. Nor can it be after-sales because the hardware does not support.

Package contains:

• OP-COM_110530a_EN-Adv_v20830_Free4All.exe
• OP-COM_150406d_EN_Pro_v20830_Free4All.exe
• OP-COM_161001a_EN-Adv_v20830_Free4All.exe
• OP-COM_170823c_EN_Pro_v20830_Free4All.exe
• OP-COM_181022a_EN_Pro_v20830_Free4All.exe
• OP-COM_190311a_EN-Adv_v20830_Free4All.exe
• OP-COM_191022a_EN-Adv_v20830_Free4All.exe
• OP-COM_200603a_EN_Pro_v20830_Free4All.exe
• VAUXCOM_160115a_GB_Pro_v20830_Free4All.exe

Flash Opel OPCOM 2021 Firmware for 200603a

How to make OPCOM Scanner working 2021 year vehicles?

Firstly you needa good opcom interface with Real PIC18F458 chipfor flash firmware, then you can downgrade or upgrade the Firmware. This will have risk if you have not good PIC18F458 Chip, it will damaged when flash firmware.

 

 

Why we flash the firmware on opcom?

1.some vehicles need lower or newer firmware ,otherwise won’t connection

2.newest opcom software 200603a need correct firmware ,fake or incorrect firmware won’t working out

 

Steps make opcom working on opcom 200603a software :

1. Make sure your interface has genuine vid and pid(6001) ,if not use the restore of ocfd.if your system has modified ftdi drivers first use the cleaner included then install the proper drivers.

2. Make sure your interface uses ftdi driver that is maximum 2.10.0.0 AND NOT NEWER!!!!! -> this is a must.

3. Make sure your interface has a proper firmware, not some fake 1.70 or 1.99 or some other chinese inventions.
To be sure use included ocflash to put one of the firmwares there. Maximum official version is 1.67 on last 2020.06 version.

——————–I AM NOT RESPONSABLE FOR BROKEN INTERFACES THAT DO NOT HAVE GENUINE PIC18F458-I/PT——————–

Any interface without this chip is just a copy that sooner or later will brake. Buy a 20$chinese cloneand be happy.
Buy a proper one(Genuine V5 model), do the modification to revision C and then you get also manual scan to CH-CAN modules.

All that you get here is FREE, make sure you read the txt on install screens. All versions are in ENGLISH.
You can install all of them in the same computer because they will make own folders in the same subfolder and will
create shortcuts in the same program GROUP.

 

Screenshots:

http://blog.obdii365.com/2022/02/22/free-download-opel-opcom-200603a-software/

Posted by: jean at 06:07 AM | No Comments | Add Comment
Post contains 452 words, total size 12 kb.

The original print via PC-Link needs to be done through a computer, and there are too many operation steps. The new 3rd generationAutel diagnostic tabletsadd print via Wi-Fi features. Users can print directly by clicking on the tablet. The original print via PC-Link is retained, and the user can choose freely.

The advantages of Wifi printing:

• Print via Wi-Fi supports the vast majority of printers in the market.
• Support Ultra management program picture & pdf file printing.
• Mopria Print Service app print plug-in is distributed with the management program and installed silently. Users only need to agree to the agreement to use it.
• Support the printer’s own Wi-Fi direct printing.

Requirement:

Management system program version: V2.09 and above

Compatible Autel scanner:

Support products platforms: Ultra, MS909CV, Elite II, MS906Pro

Support products list:Ultra, MS909, MS919,MS909CV,Elite II,MS906pro

Operation Guidance

Option 1:The printer and the tablet are in the same local area network (Same Network and the same network segment)

1) Make sure the printer and tablet are on the same local area network.

2) Enter print page.

3) Click print this page, a pop-up box will pop up to select the printing method, select Print via Wi-Fi the first time to use it.

4) Click Print via Wi-Fi, and the preview page will be displayed: You need to check the required items: License Agreement and Privacy Policy, and click Agree. (The printing plugin of Mopria Print Service app will be installed silently at this time).

5) After a while, the print preview interface will be loaded. You can switch the printer in the upper left corner to select the printer on the same local area network as your tablet, If an icon appears in the upper right corner, the connection is successful, then click Print.

6) You can also select Print via Wi-Fi as the default printing method in step 3), or directly set Print via Wi-Fi as the default printing method on the settings page, so that you can use this function later

Option 2:Wi-Fi Direct printing, that is: the tablet is connected to the local area network provided by the printer.

Confirm that the printer has this function (here, take HP printer as an example). This printing method is to connect to the local area network provided by the printer. After connection, the operation process is the same as that of option 1.

1). Make sure the wireless network of the printer is turned on, as shown in the figure below

2). Find Wi-Fi Direct in the printer network settings, as shown below

3) Turn on the printer Wi-Fi Direct, as shown below

4) Check the name of Wi-Fi Direct, as shown below

5) Check the Wi-Fi Direct password. After the tablet is connected, it will be in the same local area network as the printer. The operation process is the same as the one selected, and then this function can be used.

https://www.obdii365.com/service/print-autel-elite-ii-ms909-909cv-ultra-data-via-wifi.html

Posted by: jean at 08:33 AM | No Comments | Add Comment
Post contains 492 words, total size 13 kb.

Can anyone calculate the 39 digit pin code of a Renault duster 2021?Autel MaxiIM IM608asks for PIN to program a spare key. IM608 says it will do Duster 2018 onwards.

Solution:

Autel IM608cannot calculate PIN on 2021 Duster yet. You have to obtain 39-digit PIN from third party then program a smart key card.

It is not a matter of gateway adapter. It cannot be read even with the 12+36 gateway adapter.

You need someone to sell you the code because it is rolling code and changes every entry and exit.

If IM608 can calculate PIN on some Renault, it will ask to connect gateway adapter. Autel does not have a gateway converter yet, you can go forOBDSTAR green adapter.

Posted by: jean at 07:47 AM | No Comments | Add Comment
Post contains 130 words, total size 3 kb.

The top advantage of theLonsdor ADP adapteris that you canbypass the seed code (LSID) without Techstream subscription with NASTF. Data read by ADP adapter can be reused for programming.The rolling code from dealer changes each time. Repeated query when programming failed. What’s more, ADP adapter works without Toyota AKL license. You can still use the ADP adapter even if your Lonsdor K518ISE software has expired.

How to Program 2013+ Toyota 8A/4A Proximity all keys lost with Lonsdor K518ISE and ADP Adapter?

Step 1: Backup Immo Data
Step 2: Generate Emulator Key
Step 3: Add key
Step 4: Delete key (optional function)

Example on 8A proximity all keys lost:

Devices required:

Lonsdor K518ISEorK518Skey programmer

Lonsdor ADP adapter

Lonsdor LKE emulator(AKL requires emulator)

A new smart key to be programmed (Lonsdor Toyota smart keyor OEM key)

Step 1: Backup Immo Data

Locate the smart box and connect the 8A/4A adapter cable

Some smart box is under the passenger-seat compartment, some under the left-hand side of the driver’s seat

Go toImmo & Remote- Test- Toyota- 8A- PEPS- Backup Immo Data

1). Make sure you have done the following to complete the operation
2). Require device to WiFi network
3). Connect K518 main test cable to Toyota ADP adapter

4). Find out PEPS case, disconenct PEPS from all vehicle ports, use specific cable to connect Toyota adapter and PEPS case

Read software number
Calculate data online

Input file name you desire to be saved

Reading immo data
PEPS Dflash immo data backup successfully, the file can be used to add/delete key. Disconnect Toyota ADP adapter and PEPS cable, then connect PEPS to the vehicle.

Step 2: Generate Emulator Key
SelectGenerate key emulator (4A/8A)

function requires network connection

Select dflash file you have saved
put emulator key into k518 card slot
generating emulator

generate emergency key successfully
use the emergency key to turn the ignition on, then program a new key

you have the option to input 12-pin code directly if you have it
Select dflash file again

Lonsdor K518 detected 2 keys have been registered, and up to 5 keys can be registered.
1). Hold the registered smart key’s back or generated emergency key closer to the Start button, the buzzer beeps once,
2). Hold the smart key to be registered back closer to Start button, the buzzer beeps twice, then remove the key from the button

Key has been registered

turn on the ignition switch
Place a programmed key close to start button of the vehicle, then you hear one beep
Program complete
Turn on ignition switch

Step 4: Delete key
Select Delete Smart Key function

Make sure you have WiFi connection and PEPS is properly connected to the vehicle
This function is used to delete all absent keys.

Keys that do not touch the ignition switch will be deleted and cannot be registered to use.
Turn on the ignition switch
Turn ignition off and turn on emergency indicators
Load PEPS Dflash file to acquire 12-digit PIN

Keep the keys to be saved close to the ignition switch

Th reset keys without close the ignition switch will be deleted.
key has been deleted.

Done.

subscribe our youtube channel if need video instruction

https://www.youtube.com/user/obd365

Posted by: jean at 05:50 AM | No Comments | Add Comment
Post contains 572 words, total size 7 kb.

How can I pair mymaxisys elite vci100withautel maixsys ultra? ultra vcmi is a bit big for just pulling codes.

Here’s instruction:

VCI100/VCI200 makes it easier than trying to go out and plug it into an OBD, also take the opportunity to update the VCI at the same time.

Connect the VCI to the ultra with USB, have it powered up, then go to the VCI Manager menu in MaxiSysk, click on BT connection on the left side.

If the V100/V200 is plugged into a car, it will show up here.

Wait for the Scantool defined VCI’s Serial number and then click connect.

Should show paired/connected when you’re all finished.

Try going to the android settings first then go to Bluetooth find the VCI and then pair in the android settings.

The older VCI100 don’t support the latest protocols.
You’ll loose DoIP abilities.
You’d need to buy theVCI200to get these latest protocols.

CheckAutel VCI100 vs. VCI200

Posted by: jean at 09:53 AM | No Comments | Add Comment
Post contains 164 words, total size 2 kb.

Mitsubishi Outlander year 2008 ID46 transponder all keys lost is done today.

Chip tx27 learning by obd

2. Register key withAutel IM608

Go to Hot functions- Immo & Keys - Special function- key registration

Standard password 8A42

Here is a complete list of Mitsubishi passwords in Autel.

http://www.key-programmer.org/2022/02/09/autel-im608-program-misubisi-outlander-2008-id46-all-keys-lost/

Posted by: jean at 07:42 AM | No Comments | Add Comment
Post contains 65 words, total size 7 kb.

Cannot find the procedure reading an old immo TMS370 on Autel im508/IM608? Here are useful tips.

What you need:
Autel IM508 +XP400 Pro/IM608 Pro
Autel IMKPA kit(APB120 adapter)

Option 1:

You can read TMS370 with XP400Pro PC software.

Option 2:

Within XP400 Pro, you can see the Tms370 after updating the firmware.

For example, here is Ford Escort 1994 pats external

Solder chip onto apb120 adapter

choose the first Tms370c002 to read
followed the logic based on the pinout

After reading the immobilizer data, you can program 2 keys

http://blog.obdii365.com/2022/02/08/read-tms370-immo-with-autel-im508-im608/

Posted by: jean at 08:39 AM | No Comments | Add Comment
Post contains 105 words, total size 7 kb.