August 29, 2014
Before inquiring how to use the device, you have to figure what does emulator do and what is CANEMU CAN Filter 3-in-1 Emulator first.
What is an emulator and what does it do?
An
emulator is hardware or software that is used to duplicates the
functions of one computer system(the guest)in another computer
system(the host), different from the first one, so that the emulated
behavior closely resembles the behavior of the real system (the guest).
What is CANEMU CAN Filter 3-in-1 Emulator?
CANEMU
is created for swap CAN messages in the car CAN network. CANEMU
configuration and functions can be set by soldering configuration jumps.
Main CANEMU function is help car owners to repair (exchange to used
parts) broken car electronic computers and keep original car data: like
odometer, coding and others functions. CANEMU can be used on vehicle
makes including BMW, Renualt and Mercedes-Benz.
How to install CANEMU CAN Filter 3-in-1?
The connection of can be vivid displays as following pictures, but may differs from different vehicles.
1)
When test on F01, F02 with 1L15Y processor, F10 and F07 (BMW GT) with
1L15Y and 5M48H processors and on F25 (new X3), follow the below
connection:
2)
Work for older cars like E-class W211, S-class W220, Sprinter. Can be
installed also in instrument cluster, but in this case in EZS-EIS will
stay old odometer value. You can install like this:
3) Renault Laguna III connection - short configuration jump 3 like in picture and change KM in dashboard:
OBDII365 CANEMU Vehicle Coverage:
1 BMW F-series cars CAS4.
2.
Mercedes S-class W221 2007+, new C-class and CLC-class W204 2008+, ML
W164 2007+, GL X164 2007+, R-class W251 2007+ , E-class W212 with NEC
processor.
3. Renault Laguna III 2008+, Scenic 4 2009+, Megane III 2009+.
OBD2 diagnostic
Posted by: jean at
03:35 AM
| No Comments
| Add Comment
Post contains 303 words, total size 4 kb.
August 25, 2014
If BMW car owner lost all BMW CAS 3+ key and need a spare key, which
BMW key programmer work on BMW CAS 3+? By collecting the experience from
senior BMW locksmith, OBDII365.com conclude 3 tools, BMW multi tool, Digimaster 3 and AVDI.
BMW MULTI TOOL:
1) BMW MultiTool can do:
BMW MultiTool work very good not all case lost all keys, but the price is good.
Many users test ok, have programmed many new keys with working key in ews, cas 1, cas2, cas3 all lost key.
2) BMW MultiTool can not do Cas 3+ cas 4 all lost key:
For cas3+ you need working key even by dump or for all keys lost you
need engine ecu dump and cas dump.Im sure soon it will be cas3+ lost
keys by dump of CAS unit only, but for now cas3+ by dump needs either
working key or dump of engine ecu also.
Digimaster 3:
Some users test cas3+ very good working digimaster 3 via obd, done
about serveral keys. Never down, a expensive kit !! But looks good.
AVDI:
Some locksmiths strongly recommend buy original equipment guys as the AVDI on CAS3+ (which you cannot avoid!!!!!).
But some locksmith proved AVDI can't do cas4+ encryption keys, the key can only do CAS4.
Wish more experienced users share more cheap working tools which tool work on CAS 3+ and CAS4+ all key lost.
http://www.obdii365.com
Posted by: jean at
07:50 AM
| No Comments
| Add Comment
Post contains 243 words, total size 2 kb.
August 22, 2014
http://www.obdii365.com/wholesale/bmw-icom-2013-1-v-external-hdd-fit-all-computer.html
BMW ICOM Software Description:
Software version: 2013.1
Software used on: BMW ICOM & ICOM A2
ISTA-D:2.34.0
ISTA-P:48.1.002
VIN: 2012.12.15
Software format: External HDD
Memory,Hard disk 320GB
Computer system requirement: Supports windows XP and windows 7, win7 64bit Dual-core processors above I5 with 8G Memory,Hard disk 500GB
Run in VWMARE(Virtual Machine)
Attention: ISIS and ISID are both multi-language, if you want to check the information of Circuit diagram, only English and German.
More BMW ICOM products and software view here.
Posted by: jean at
11:15 AM
| No Comments
| Add Comment
Post contains 108 words, total size 1 kb.
August 19, 2014
BMW ICOM A2+B+C is the professional tool for diagnose and programming for all BMW series cars mainly for after 2009.
BMW ICOM software mainly has the following languages:
English,
German, Spanish, French, Italian, Polish, Portuguese, Turkish, Czech,
Swedish, Dutch, Indian, Greek, Russian, Chinese, Japanese, Korean and
Thai.
Diagnose, programming and TIS diagram circuit all have these languages.
Are you troubled with the language setting for BMW ICOM software? Do not worry, follow our instruction to change the language as you want.
1)
Enter the BMW icom software, you will see this interface, click the
icon which appearance is wrench, then you will see the other language:
Then choose the language you want:
More BMW diagnostic tool click here.
Posted by: jean at
09:27 AM
| No Comments
| Add Comment
Post contains 125 words, total size 3 kb.
August 13, 2014
I dare to bet that if you make inquiry for any OBD2 dealer, they will definitely confirm you that BMW Multi tool CAS key programmer is better than AK300 key programmer. Why? The follow part will state the reason.
First of all, let’s look at the chart below:
Easy conclusion can be drawn from the chart that both Multi tool and
AK300 can work on BMW CAS1-3 vehicles models. While BMW Multi Tool CAS
key programmer is also capable of doing EWS models with the help of CAS PLUG.
What’s more, Multi tool covers more range of vehicles makes, some of them even up to year 2013. Multi tool projects more function comparing to AK300 key programmer (list in the chart). Multi tool supports free software download and update online, while AK300 cannot.
BMW Multi Tool Newest Software Download:
BMW Multi Tool V7.0 Software Free Download
BMW MULTI TOOL V6.0 Software Free Download
BMW Multi Tool V5.9 Software Free Download
If you want to realize EWS key programming function, go and buy CAS PLUG here:
http://www.obdii365.com/wholesale/cas-plug-for-b-mw-multi-tooladd-ews-function-1713.html
Posted by: jean at
07:32 AM
| No Comments
| Add Comment
Post contains 184 words, total size 3 kb.
August 08, 2014
BMW F series smart key need to replace remote battery after two years of use, many users think the smart key is damaged if it fail to start the car after the battery is replaced, actually after the battery replaced, it needs to synchronous learning, because the remote battery will lose memory after power supply disconnects for 5 minutes, according to synchronous learning, the key will gain remote and start up the car. However, not all keys need to synchronize after their battery is replaced.
The way to synchronous learning:
1.Smart key sensing zone.
Put the smart key close to the key symbol of sensing area at the side
of steering wheel, press the Start button for at least 10 seconds until
the dashboard lights all on, synchronization succeed, slam the brakes
and press the Start button, then it can work. This way is also suitable
for the newly-matched smart key, for the first fully new smart key
synchronization and reorganization.
2. Start up the button.
You may be interested in BMW multi tool-BMW CAS Key Programmer, read details at: http://www.obdii365.com/wholesale/new-b-mw-multi-tool.html
Want
to make key for both CAS and EWS BMW? Get an additional one CAS plug,
read details at:
http://www.obdii365.com/wholesale/cas-plug-for-b-mw-multi-tooladd-ews-function-1713.html
More BMW car key click here.
Posted by: jean at
07:59 AM
| No Comments
| Add Comment
Post contains 216 words, total size 3 kb.
32 queries taking 0.2021 seconds, 176 records returned.
Powered by Minx 1.1.6c-pink.