March 31, 2015
Autel MaxiDAS DS708 is a powerful scan tool that is able to customize many special settings. Following displays an example of activating BMW 7 series E65 Dynamic Drive/Active Roll Stabilization with DS708 automotive diagnostic scan tool.
What is Dynamic Drive?
Active Roll Stabilization (ARS) is an "active" suspension control system design to reduce body roll in cornering, resulting in improved handling. Dynamic Drive uses active stabilizers on the front and rear axles to counteract the vehicle's tendency to roll in a corner. Working together with acceleration and position sensors, a management system and other components, such as a compensation tank for sound control, the system ensures supreme agility at all speeds, balanced reactions to load changes and remarkably precise steering.
Instruction:
Well install DS708 diagnostic software
Connect Autel DS708 scanner with vehicle via OBD socket
Select vehicle region: European
Select vehicle make: BMW
Turn ignition OFF, wait about 10 seconds, turn ignition ON again
Select BMW series: 7 series
Select vehicle model: E65/E66/E68
Select detail vehicle model: 735i-N62-SAL
Select vehicle model version: EUR-LHD
Check and confirm your vehicle information
http://www.obdii365.com
Select Services Function from Main group menu
Select Chassis control module
Select Dynamic Drive option
Select Startup
Select Start Startup
Follow the system prompts and accept the system notice
The control unit is currently carrying out an internal reset
Make sure there is fault code stored in ECU memory
Get on the car and test the result
Back to main program or exit the Autel Maxidas DS708 scanner software program.Share from http://blog.obdii365.com
Posted by: jean at
03:44 AM
| No Comments
| Add Comment
Post contains 261 words, total size 3 kb.
March 20, 2015
There is a tool SVDI VAG commander with BMW commander released, and it is somewhat like FVDI and VVDI no
matter what the outlook or the product name, then some people will ask
the users who already have one whether it is better than FVDI and VVDI,
hope they share some experience about these products.
SVDI is Xhorse product?
Many users care whether SVDI is Xhorse product, yes, it it is according
to uobd2.net engineer confirm. The brand name-Xhorse means good
quality, trust and reliable.
Cheap doesn't mean is no good
It is only for $599usd, such a cheap price make some users doubt it is
not an X-Horse product as X-Horse products seem to hold their value and
don’t drop to silly prices. At $599 it looks like they are trying to
shift the last of the crap quickly.
If fact, according to the trust
site uobd2.net, it is Xhorse product, it is a newest tool and on sale
promotion. Many company have different versions of product to cater for
different customers, definitely will not be as good as VVDI, but for the
price….. This is not crap like the FVDI, at less than 600 for VAG and
BMW is value for money, Cheap doesn’t mean is no good.
SVDI can do what?
Some users already ordered and tested, this is from one poster from DK
forum †Today did BMW E60 2006 CAS 3 add new key and change km via OBD
SVDI works perfectlyâ€, another poster "Yes worthy tool. My friend added
the key to Jetta 2013? http://blog.obdii365.com
Posted by: jean at
09:23 AM
| No Comments
| Add Comment
Post contains 267 words, total size 3 kb.
March 18, 2015
BMWMulti Tool V7.5 OBD2 CAS1-4 Key Programmer is powerful device for BMW key programming. With the launch of the newest V7.5, BMW multi tool can support BMW CAS 1-4 key programming.
Additionally BMW CAS key programmer equips more functions related to key making, which make this device more welcome than many other key programmers, especially for BMW vehicle. Please check more info below:
1. Read/Restore CAS KEY information;
2. Disable/Enable key with working key;
3. Prepare dealer key with CAS EEPROM dump;
4. Unlock dealer key prepared with our software with CAS eeprom dump or KEY information;
Of course, BMW Multi tool not only work for key programming, more functions are also contained as below:
1. Care access system identification;
2. Read/ Write CAS EEPROM, KM, synchronization codes (stored in CAS System);
3. Clear DTC and shadow;
4. Synchronize DME, CAS and ELV;
BMW Multi Tool V7.5 Free Download:
http://down.obd365.com/bmw-multi-tool-v7.5.zip
NOTE:
1. Be sure to disable/uninstall anti-virus software
2. Do Not need to pay another US$550.00 to get CAS4+ Authorization.
How to update BMW Multi tool OBD2 CAS1 / CAS2 / CAS3 + to V7.5:
New Dongle Software Display (the system displays the Multi tool device functions);
Get software dongle and hardware SN and version information;
Click "Device Update" to update dongle and device;
BMW multi tool supported immobilizer type and function:
http://www.obdii365.com
Posted by: jean at
07:53 AM
| No Comments
| Add Comment
Post contains 232 words, total size 5 kb.
March 17, 2015
Hand-held BMW Creator C110 OBDâ…¡code scanner is designed to troubleshot BMW vehicle from 2000 to 2012, including read DTCs, clear DTCs, display live data and clear adaptation. The new updated V3.8 software adds the active test function for BMW MINI models. Here is the example of resetting 3-serie E46 airbags/SRS light with C110.
Step-by-step instructions:
Well install Creator C110 OBD2 software
Plug the code scanner with vehicle via OBD socket
Select DIAGNOSE function form main menu
Select BMW series: 3 Series
Select the detail BMW model: 3-serie E46
Select Body control module
Pull down the drop-list and select SRS (Air bag), click OK
Select Read trouble code
The system will automatically read error code information stored in Body module, press OK
Select Erase trouble code.
The reason for the airbags light was on the dashboard. It needs to be disconnected.
Once reconnected, go back to Creator C110 BMW code reader program, select Erase trouble code again.
The system will display Trouble code is erased message.
Airbag light will start to flash. If the light does not stop flashing, turn ignition off and then turn it on.
blog.obdii365.com
Posted by: jean at
03:01 AM
| No Comments
| Add Comment
Post contains 195 words, total size 5 kb.
March 13, 2015
Super ICOM V2015.03 Software is now the best and the newest software for BMW ICOM and ICOM A2 in the after-market.
Current software version: 2015.03:
ISTA-D: 3.47.30
ISTA-P: 3.55.0.100
VIN: 2015.03
Highlights for Super ICOM software V2015.03:
1. Support BMW diagnostic, coding and programming;
2. Free update for one year on official website (www.supericom.com, while after one year, update fee is 300USD/year or 50USD/time)
3. Full repair article and writing diagram is available with multi-language, check details as follows:
ISTA D: French, German, Greek, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Swedish, Thai, Turkish;
ISTA-P: German, British English, American English, Swedish, Spanish,
Italian, French, Greek, Japanese, Czech, Korean, Indonesian, Chinese,
Taiwanese, Turkish, Dutch, Portuguese, Russian, Thai, Polish.
4. Use directly and easily;
1). USB key inside parcel;
2). Software is preinstalled;
5. Dealer level product;
6. All SATA format laptop or computer meets the following demands:
CPU: Intel Celeron 2.0 and above (i5 Recommend);
RAM: 2 GB and above (4 GB Recommend);
USB: 2.0 and above.
Super ICOM software display:
Get more information on OBDII365.COM.
Posted by: jean at
03:03 AM
| No Comments
| Add Comment
Post contains 186 words, total size 5 kb.
If newest 2014.12 BMW ICOM software HDD fails to connect with your vehicle or fails to diagnose cars, you will need to run for firmware upgrade.
How to update V2014.11 BMW ICOM Firmware?
1. Connect BMW ICOM A2 diagnostic unit with computer via network cable. Power up ICOM A2 with
12 V adaptor or connect it with vehicle via OBD diagnostic socket.
2. Browse IE explorer to http://169.254.33.45:60080/, enter name: root and password: NZY1150263
3. Click "Update Firmware", ICOM firmware information will be displayed.
4. Select "ICOM-BootImage-01-13-00.bin" file, set image type to "SYSTEM". Click "Send the file"
5.
When the system pops out the message "Write the image file to the
flash?", click "Yes". The ICOM indicator light will turn red.
6. When the system prompts "The SYSTEM IMAGE update was successfully", click "Update Firmware" icon
7.
Select "ICOM-ApplicationImage-01-18-00.bin" file, set image type to
"APPLICATION", click"Send the file". The process will take a few minutes
due to the file size, please wait patiently.
8. Click "Yes" when
system pops out "Write the image file to the flash?" notice. ICOM A2
unit indicator light will turn red again.
9. When all settings are complete, click "reboot"
Free Download the BMW ICOM firmware update attachment:
https://mega.co.nz/#!T8B3xK7C!QeVVfQt3f8S9N03sHmWPyDtRnlFqn8DTBkQdv1c7148
NOTE:
1) Set the local connection IP to obtain an IP address automatically
2)
There are 2 firmware update files, first install the small file and
choose "SYSTEM" correspondingly. Then install larger file, select
"APPLICATION" instead.
3) The firmware file and method fits for BMW ICOM A1, ICOMA2 and ICOM.
More BMW ICOM diagnostic tool click here.
Posted by: jean at
02:43 AM
| No Comments
| Add Comment
Post contains 270 words, total size 3 kb.
March 11, 2015
http://youtu.be/nsMg_kBYBGM
1. It is extremely safe on key programming and ecu programming.
2. AutoHex II BMW software takes you to the mastering in BMW if you have just basic skills.
3. It combines all workshops needs, besides the full diagnose functions and full service functions.
4. Can add Toyota software for free, also can add Hyundai Kia GDS and Nissan by paying cost
http://www.obdii365.com/wholesale/original-autohex-ii-scan-tool-for-bmw-diagnose-and-programming.html
Posted by: jean at
09:56 AM
| No Comments
| Add Comment
Post contains 143 words, total size 2 kb.
Every mechanic wants to freely download car diagnostic software from the Web. Last night, a new mechanic friend of mine called and said his BMW Scanner V1.4.0 CD was damaged and the software therefore could not work.
He was wondering if there was a place to download the software for free. Well, I do know a website that provides free BMW Scanner V1.4.0 software. It is an OBDII seller named OBD365, which I have worked with for more than a year.
You can download the software from here. Click Technical Support then you will find Free Download as shown below.
Click BMW Scanner 1.4.0 software and you will go to the download page.
The website also provides many other free car obd2 diagnostic softwares and drivers. You can explore it and find what you need.
Posted by: jean at
01:14 AM
| No Comments
| Add Comment
Post contains 146 words, total size 2 kb.
share from http://blog.obdii365.com
There is a growing trend among BMW owners buying car diagnostic tools to do their own auto repairs, while eBay sellers trying to sell unnecessary stuff to these owners. I used to be one of the BMW owners buying whatever the sellers to me to buy. But it is time to be wise. After using a lot of BMW diagnostic tools, I just know which are good, which are useless. Here I have compiled a list of the top three ones for every level of DIY.
1. BMW ICOM ISIS A+B+C
BMW ICOM A+B+C is an official BMW Group Service tool especially designed for
diagnostics of all BMW series. It is made up of three parts: ICOM A,
ICOM B and ICOM C. ICOM A is used for diagnosing vehicles with OBD
capability; ICOM B is for programming with MOST port; ICOM C is for
diagnosing older BMW models with diagnosis socket in engine compartment.
It supports programming, troubleshooting, DTCs reading and erasing and
coding in all systems.
2. iOBD2 BMW Diagnostic Tool for iPhone
iOBD2 BMW is a portable OBD2 code scanner that works together with your iPhone
through WiFi or Bluetooth. This iOBD2 code scanner especially works on
BMW car models. It is not as powerful and stable as BMW ICOM, but it is a
lot cheaper. It allows the user to read and clear fault codes, read car
data, record engine speed and ignition time in all the BMW car models
with OBDII or EOBD protocol.
3. FVDI BMW ABRITES Commander
FVDI Commander for BMW and MINI may cost much more than the previous
two tools, but it really worth the money. It not only has all the
functions that BMW ICOM A+B+C has, but also supports car key programming
and mileage programming for systems such as IKE, LCM, EWS, ECU, ABS,
VTG and EGS.
More BMW Diagnostic tool Click here.
Posted by: jean at
01:05 AM
| No Comments
| Add Comment
Post contains 324 words, total size 3 kb.
March 04, 2015
I already have a BMW CarSoft scanner and recently found the INPA and EASYDIS software on a website, then I started thinking was it possible to make it work with INPA Ediabas software. After many weeks of reading, and struggling, finding sparse bits of information here and there, I have finally got INPA and EasyDIS software working and communicating with my E36, while using the CarSoft interface instead of th INPA cable. Here is my guide to help anyone else who may be as frustrated as I was trying to get this to work.
Inpa and EasyDIS software can bd downloaded from this link:
http://www.4shared.com/dir/LfFoCBq2/An_EasyDis_Machine.html
Password: Bimmerforums
How to:
Part 1 – Make INPA work with CarSoft
- Insert the CD or mounting the image
- Go to the "<CD DRIVE>:\Referenz\INSTALL" folder
- Launch the file "Instprog.exe"
- Select Language and click Continue
- Click Continue
- Leave C:\ as destination drive, and click Continue
- Select BMW Group Recertification programs USA and click Continue
- Place check marks on the option for Complete next to EDIABAS and INPA, then click Continue
- Select OBD as interface and click Continue
- Press "End" when the installation has completed
- Open Windows Explorer and navigate to the folder "C:\Ediabas\Bin"
- Locate the file EDIABAS.INI, and open it with notepad
- Locate the line for "remotehost" and "port" adjust to "192.168.68.1" and "6801" respectively
- Save and close the file.
- Navigate to the folder "C:\EDIABAS\Hardware\OBD" and launch the file OBDSetup.exe
- A screen will appear, press any key to close it.
- Press Windows+Break to open System Properties.
- Proceed to the Advanced tab, and press the Environment Variables button:
- Find the Path system variable, highlight it and press Edit
- At the end of the path statement, add a semicolon, and the path "C:\ediabas\bin" then press OK
- Connect your CarSoft interface to the OBD port and to your computer. Open Device Manager, and make certain that your port is:
- Assigned to COM1
- FIFO buffers are enabled
- Receive and Transmit Buffers are set to 8
Note: I have found it is necessary to run CarSoft once to get the interface to work with INPA.
- Start CarSoft, and perform a diagnosis of the DDE:
When the test completes you can close CarSoft. If it fails, you need to
get your communications with your interface and CarSoft working before
continuing:
- Start INPA with the shortcut INPA(_.IPO)
- Try and perform a test. ( My car is an E36 328i)
Part 2 – Make EasyDIS work with CarSoft
Now that INPA K+Can is working, we can get EASYDIS to work with the same interface.
Open "Manage Virtual Networks" for VMWare and proceed to the Host Virtual Network Mapping tab:
Click the arrow beside VMnet1 and click Subnet:
Enter 192.168.68.0 for IP Address and press OK:
Open Windows Explorer and navigate to "C:\EDIABAS\Bin" and launch the file IFHSrv32.exe.
A windows does not open, it simply places an icon on your task bar:
Open VmWare, and edit your EASYDIS virtual machine to only have one Ethernet adapter, and assign it to VMnet1.
Start the EASYDIS Virtual Machine.
Click on Administration.
Under the EASYDIS item, click on Calibrating Touch-Screen.
Enter password (dealer #) and get a new window.
Enter "1" to Configure EDIABAS and press enter:
Then type "2" and press enter to run "API test" - If you see the following menu, the test is successful:
If the test was not successful, there is likely a network communication problem.
Exit the screen by typing in "0" and pressing enter. Exit the remaining screens by pressing "9" and enter.
The system will reboot.
After the system reboots, and EASYDIS comes up again, click on Diagnosis.
Select your model of car, and press the arrow to continue.
You will likely receive errors about battery power, click Ok.
After this, select manual to identify your vehicle.
Choose your vehicle and click continue.
Choose a module.
This is just for fun. If you do not have a CarSoft, you simply just buy a brand new INPA cable instead and save 20 bucks.
Posted by: jean at
06:22 AM
| No Comments
| Add Comment
Post contains 706 words, total size 6 kb.
32 queries taking 0.1467 seconds, 184 records returned.
Powered by Minx 1.1.6c-pink.