Nissan Qashqai 2019 is programmed successfully without reading pincode or releasing steering lock withxtool x100 pad2.

it’s my first time programming Qashqai 2019 so I want to share the tip.

Didn’t read pin code, directly program key open driver door and close it then push the start button, wait 5 seconds and job done.

The key is original not generated.

The car is imported from Europe.

Here is the xtool x100 pad2 NISSAN Qashqai Function List V27.14 claimed by the manufacture.

1. Nissan Qashqai from China:

With smart key system (20 pincode): program smart keys.

Without smart key system (20pincode): program key

2. Nissan Qashqai from Europe:

2007 -2009: program remote – Fault code, erase DTC, program keys.

2009-2013: program remote – Erase DTC, program keys, release steering lock

2009-2013: Mechanical key – Erase DTC, program keys, release steering lock

2009-2013: Smart key system – program smart keys, erase all smart keys, program steering lock

2014 – : Immobilizer system – Type1 – program smart keys

2014 -: Immobilizer system – Type2 – program key

Good to know:

Obdstar X300 Pro4 / obdstar X300 DP Plus is also able to program Nissan Qashqai 2019 Prox all keys lost via obd.

Read procedure here:http://blog.obdii365.com/2021/12/09/obdstar-program-nissan-qashqai-2019-prox-all-keys-lost/

Posted by: jean at 06:46 AM | No Comments | Add Comment
Post contains 210 words, total size 4 kb.