Recently, the newly launched V4.94 Digiprog 3 makes Digiprog 3 become the hot topic among many car enthusiasts. While here what I want to share with you is "how to do mileage correction via digiprog 3”.

Take my BMW E71 as an example; you can follow the steps below to adjust the mileage.

1. Remove the instrument cluster and program of this gem.
2. Place the READY PROGRAMMED instrument cluster in range, for example, on the passenger seat, but do not connect it to CAS programming!
3. The diagnostic port is located in the driver’s footwall. Turn the ignition on a vehicle. Connect connector ST16 the diagnostic port and the DIGIPROG.
4. Select the program: cars / trucks – BMW – 6 Series (E71) – CAS 3 DIAG.
The DIGIPROG displays the old / wrong Mileage.
5. Now you just confirm with the hook. (Note: Please Do Not enter new value)
Pay attention to the display from Digiprog. If the message appears: IKE INSTALLATION must be installed within 60 seconds, the IKE (instrument cluster) or connect to the vehicle. Now a timer is running from (110-0).
6. The instrument cluster now shows the new / correct KM – to stand. Odometer correction tool

Posted by: jean at 06:54 AM | No Comments | Add Comment
Post contains 213 words, total size 2 kb.