December 18, 2015
Program BMW E46 ECU with WinKFP
BMW ICOM A2ISTA-D ISTA-Psoftware HDDcomes with BMW standard tool (INPA, EDIABAS and WinKFP) and other engineer programming software. Here is an instruction onBMW E46318DME software update on M43TUenginewithBMW ICOMWinKFPsoftware.
Instruction:
1) Well install BMW ICOM software HDD (newest2015.10 Rheingold ISTA-D 3.50.10 ISTA-P 3.56.002).
2) ConnectBMW ICOM A2+B+Cdiagnostic systemhardware with vehicle via OBD socket.
3) After well load software, run BMW WinKFP software on the desktop.
4) Select "F1 Comfort modeâ€
5) Select "F3 Update ZUSBâ€, then choose engine type "MDS43†by pull down the drop-down list on "ECU family†Tab. Press "Done†button.
6) Press "F3 Prog ZB-Updateâ€, accept the windows prompt by clicking on "Yesâ€
The WinKFP software will display the detail vehicle information on the top of the program
Accept "The user info field can still be programmed 12 times. Program ECU?†notice by clicking "OKâ€
WinKFP now is updating the ECU, wait until it processes to 100%.
ECU update is completed, ZUSB-Update programming OK.
Exit BMW ICOM WinKFP software and disconnectBMWICOM a2+b+cdiagnostic tool.
Posted by: jean at
08:07 AM
| No Comments
| Add Comment
Post contains 172 words, total size 5 kb.
23kb generated in CPU 0.0084, elapsed 0.0864 seconds.
35 queries taking 0.0795 seconds, 170 records returned.
Powered by Minx 1.1.6c-pink.
35 queries taking 0.0795 seconds, 170 records returned.
Powered by Minx 1.1.6c-pink.
