BMW F-series coding software E-sys is able to work with BMW ICOM emulator and ENET cable. Here’s simple guide to set upBMW ICOM A2for E-sys software.

With ICOM A2/ICOM Next, you connect via ICOM. You will need to lock IP with program like EasyConnect or Itool Radar.

WithBMW ENET cable, you connect via VIN.

BMW ICOM Setting for E-sys:

1)Run ISTA-D and check ICOM IP (mine is slight different of windows IP 169.254.55.70)
Properly itoolradar will do the same.

2) Run easyconnect
Type: REMOTE
IP: 169.254.55.83 (edit file ip_db.txt and add IP)
Mode: OBD_ab625
ICOM Lock
Check

3) Run e-sys
Connect via ICOM/Ethernet (tcp://169.254.55.83:50160)

(click to enlarge images).

With ICOM, you can certainly try with ISTA+ to see if you get a different IP to lock with Itool Radar.

For ENET,

• Make sure motor is running if car is not on a Charger.
• Third party Security Suites (Antivirus / Firewall / etc) are disabled
• LAN Adapter is set for DHCP and not using a Static IP.
• The Target Connection Window should not be blank (It should show multiple target connections for different chassis’)

http://www.obdii365.com/producttags/bmw-icom-next.html

Posted by: jean at 05:57 AM | No Comments | Add Comment
Post contains 193 words, total size 8 kb.