April 28, 2015
If you just get your battery replaced, you have to recode the CAS module with BMW engineering and programming software. After you program an aftermarket battery, it needs to be registered. BMW Standard Tool (INPA, Ediabas Toolset32) is needed.
Tool needed:
Hardware: WIFI BMW ICOM A2+B+C diagnostic system (a single INPA cable is not enough)
Software: BMW ICOM ISTA/D ISTA/P software HDD with engineering and programming software (INPA, EDIABAS etc)
How to code/program BMW E90 with INPA?
NCSExpert is able to code BMW battery as well. Here we use BMW INPA software.
Well install BMW ICOM and engineering software
Connect BMW ICOM a2+b+c OBD2 diagnostic tool with vehicle via USB or WIFI wireless connection
Open INPA software on the desktop
Select vehicle model: E90
Select Engine
Select ECU type: MSD80
Select F5 Status
Select PM-IBS
Select PM FIELD 2
Under
the PM Field option look at the ah reading registered, to see what it's
set at to charge your battery at present. If it is incorrect, you need
to code the CAS>>KLASSE_BATTERIE>>**ah to your battery
specification.
Once you have coded the module, re-register your battery using the INPA or EDIABAS Tool32 software.
How to register old and new BMW vehicle battery?
For older BMW models, register BMW battery with BMW INPA program:
Step 1: select "BODYâ€
Step 2: select "POWER MODULEâ€
Step 3: select "ACTIVATEâ€
Step 4: Select "ACTIVATE2†from the next menu
Step 5: select "F7: Register battery replacementâ€.
Then INPA will display the register completed prompt "Register battery replacement Activated properly."
Because newer BMW model does not contain Power Module, INPA cable will not work, Ediabas Toolset32 is required.
Step 1: Locate Ediabas folder
Step 2: Open MSD80.prg
Step 3: Look up steuern_batterietausch_registri. (near bottom of job list)
Step 4: Go to "Jobs†menu
Step 5: Select Run Job
Check the "Results†window for the line JOB_STATUS = OKAY
After complete register the battery, go back into INPA and check the PM Field 2, to see if the new ah reading has been registered.
Exit the BMW engineering software and disconnect the BMW ICOM diagnostic system.
Posted by: jean at
01:50 AM
| No Comments
| Add Comment
Post contains 358 words, total size 3 kb.
April 23, 2015
Here is the detail instruction on updating/reprogramming the DME module and change the VIN stored in the DME dump with BMW WinKFP software.
Tool needed:
BMW ICOM A2+B+C WIFI OBDâ…¡diagnostic system
BMW ICOM ISTA/P Rheingold software HDD with engineering and programming
software BMW standard tool V2.12 WinKFP V5.1.6 (or higher)
Vehicle model: BMW E46 316i
Instruction:
Well installed BMW ICOM ISTA/P software HDD and engineering software
Setup BMW ICOM a2+b+c and connect the system with vehicle via OBD port
Open WinKFP software on the desktop
Select F1: Comfort Mode
Select F3:Update ZUSB
Select BMW model ECU type: JBBF81, press OK
Select F4: Enter VIN. Manually enter vehicle VIN number, click OK
Press Done
Select F4: Special
Select F1: Read UIF, you will be able to view the current vehicle
information and VIN. The current vehicle identification number in Entry 2
is 1111111. Press OK then click Done.
Select F3: Program ZB-Update bottom, the screen will display if you want to program current ZBNr, click Tak.
Accept program ECU prompt
The DME module upgrade is processing, wait until it processes to 100%.
WinKFP software will display "ZUSB-update programming OK message" when completing update the module.
Select F4: Special
Select F1: Read UIF
You will notice that the vehicle identification number in Entry 2 has changed to P224855. Press OK.
Save settings.
Exit the WinKFP software and disconnect BMW ICOM diagnostic tool.
Posted by: jean at
02:37 AM
| No Comments
| Add Comment
Post contains 241 words, total size 6 kb.
April 21, 2015
Take my BMW E71 as an example; you can follow the steps below to adjust the mileage.
1. Remove the instrument cluster and program of this gem.
2. Place the READY PROGRAMMED instrument cluster in range, for example, on the passenger seat, but do not connect it to CAS programming!
3. The diagnostic port is located in the driver’s footwall. Turn the ignition on a vehicle. Connect connector ST16 the diagnostic port and the DIGIPROG.
4. Select the program: cars / trucks – BMW – 6 Series (E71) – CAS 3 DIAG.
The DIGIPROG displays the old / wrong Mileage.
5. Now you just confirm with the hook. (Note: Please Do Not enter new value)
Pay attention to the display from Digiprog. If the message appears: IKE INSTALLATION must be installed within 60 seconds, the IKE (instrument cluster) or connect to the vehicle. Now a timer is running from (110-0).
6. The instrument cluster now shows the new / correct KM – to stand. Odometer correction tool
Posted by: jean at
06:54 AM
| No Comments
| Add Comment
Post contains 213 words, total size 2 kb.
April 17, 2015
BMW Super iCOMexternal HDD is released to 2015.05 ISTA/D V3.48.30 on April 16th, 2015. The newest version is based on Win 8 operating system fitting all Sata laptops.
The super iCOM works perfect with BMW ICOM/ BMW ICOM A2+B+C diagnostic system. With the software Super iCOM SN Reader, you can read out your product SN easily.
Super iCOM WIFI function enables the wireless communication among different types of VCI, such as OPS, INPA, ENET, ICOM A1, ICOM A2 etc. But you need to set the software under professional tech supports.
Software version: V2015.05
ISTA/D: 3.48.30
VIN: 2015.05
Language:
ISTA D: French, German, Greek, Italian, Japanese, Korean, Portuguese, Russian, Spanish, Swedish, Thai and Turkish
ISTA-P: German, British English, American English, Swedish ,Spanish
,Italian ,French ,Greek ,Japanese ,Czech ,Korean ,Indonesian ,Chinese
,Taiwanese ,Turkish ,Dutch ,Portuguese, Russian, Thai, Polish
The default language is English. If you need other language, please send the serial number to us.
How to update BMW Super iCOM ISPA to 2015.05 verison?
1) Browse super icom official website: www.supericom.com2) Download Super ICOM Updater V1.0 update tool
User name: The SN number (serial number)
Password: the last 8-digit number on the envelop
3) Install the update tool to run an upgrade.
We supply one year free update online. After one year, update fee is 300USD/Year or 50USD/time. More BMW ICOM products click here: http://www.obdii365.com/producttags/bmw+icom/
Posted by: jean at
07:21 AM
| No Comments
| Add Comment
Post contains 232 words, total size 3 kb.
April 16, 2015
OBDII365 offers US Best-sold automotive devices that can be Directly
Shipped from US Warehouse with Free Shipping (Not covering all items),
covering categories of OBDII fault code scanner, auto key programmer and
more. You are recommended to browse them in detail via the following
page:
http://www.obdii365.com/producttags/US+Hottest/
Multi-language Autel MaxiDAS DS708 is powerful diagnostic tool that supports multi-function, including ECU
programming, remote diagnosis and more covering Asian, European and
American vehicles.
Newest V3.3 SKP-900 is the best hand-held OBD2 key programmer supporting smart key and all
key lost programming, covering almost all the vehicles worldwide without
tokens limitation
The Key Pro M8 is a powerful, professional and token-based auto key programmer; meanwhile this device is available to more functions except key programming, such as reading and clearing DTCs, display live data, ecu identification, component actuation etc.
NSPC001 Automatic Pin Code Reader is user-friendly (no need install software) and token-based device for most Nissan to get pin code and read out BCM codes.
Except the devices listed above, Launch X431 Creator VIII (CRP129),
Launch X431 Creator VII+ (CRP123), Launch X431 iDiag Scanner for ISO
V8.0 and Autel AutoLink AL319 Code Reader are all within the list.
Posted by: jean at
02:39 AM
| No Comments
| Add Comment
Post contains 203 words, total size 4 kb.
I am a customer from USA, i bought a wifi BMW ICOM A2+B+C and EVG7 DL46/HDD500GB/DDR8GB Diagnostic Controller Tablet PC from obdii365.com last month.
First i should say the shipping service is extremely good, i got all items in 4 days.
After ireceived the parcel, i find that they have installed BMW ICOM HDD on EVG7 laptop for me already, so nice!!! I can use it directly, a big surprise!!!
Then i can not wait to start my ICOM device, problem is coming. The device ask me for the password 1 and password 2:
I ask obdii365 customer service via Whatsapp, they reply me almost in one second, thepassword1is "BMW", the password2 no need fill anything, just ignore it.
When i try to input the password, the screen seems freezed, i can not do anything. Then i contact customer service again, they told me that when BMW ICOM device work together with EVG7 PC, must useausb keyboard at the same time. Then i got ausb keyboard to work together with EVG7 PC and BMW ICOM device, allis working 100%!!!
OBDII365 has a great customer service and professional technical support.What can i say with such amazing service except thanks!!
Reference Links:
http://www.obdii365.com/wholesale/new-bmw-icom-a2-b-c-diagnostic-programming-tool.html
Posted by: jean at
01:04 AM
| No Comments
| Add Comment
Post contains 216 words, total size 2 kb.
April 10, 2015
This BMW ENET (Ethernet to OBD) Interface Cable is designed to work on BMW F-series alone. Let’s go straight to the point.
You need:
A BMW ENET cable
E-Sys program, datafiles, token and PIN
A PC/laptop running Windows XP system (mine second-hand Panasonic Win xp 64 bit OS)
Just spending a little money and you will get a powerful ENET cable for $16.99 without postage. I recommend get one from OBDII365.com which offers good technical support. Usually, after he receives payment, they can have the cable shipped as soon as possible and arrive with you between 3 to 4 days.
I have found some clue on how to solder the cable list as below. Better understanding with the pictures guidance.
The package comes with E-Sys program, datafiles and such which enable me to use directly without downloading. I was offered E-Sys v3.18.4 in combination with the v46.3 datafiles. I have to mention that the datafiles contains more than 10GB memory, so you have to take hours and hours to download it all. And you have no choice but to wait patiently.
Then please refer the pdf guide here E-Sys – MacOSX installation and configuration.pdf to start install the E-Sys. As soon as you start the vehicle, the E-Sys program will automatically saves the CAF files into "C:\ESysData\CAFâ€. Then copy all these files on to the certain folder.
After that, please do as the following steps:
1) Connect the laptop to vehicle and click the connect symbol
2) Select "F20"(not F020 direct) and click connect. Close the popping out message when you see your car VIN, if not, repeat the progress again.
3) Accept following windows message and close the program
4) Switch to coding mode, go to expert mode and click on coding icon on the left vertical pane.
5) Come to the coding program. Click Read button under the VO pane and then FA appears
6) Now Click on Read VCM or Read button under VCM pane. You will find it it will be on your right hand-Center
7) All the ECU's will display on the main program. Then expand the ECU’s and all most all ECU’s will have a file starting with CAF (With green indicator) right click on the CAF file and select Read coding data, ignore whose who did not contain CAF. But remember do not click all CAF files. Four or five is the maximum.
8. After complete above procedures, go to c:/esydata/CAF. All the .ncd files have been generated on the CAF folder.
9) Copy .ncd files and on your pc or laptop. Run the software program and then start to do F30 coding according to the window instructions.
I have successfully realized these things by using the ENET cable:
-Remove PDC + cam disclaimer
- Mirrors open automatically when closed with comfort access
-Change DVD region code
- Remove disclaimer
- Video in Motion
- Turned the Seatbelt Gong off
- Side View Cameras on at all speeds
- Change DVD region code
- Tire pressure + temperature in TPMS
- Mirrors close by pressing doorknob (comfort access only)
- Disable A.S.S. by default (can still be enabled but starts with setting ‘off’)
- Remember last setting of A.S.S. (works only when not disabled by default)
- Change ringtones
…
I am still working on it and will figure out more functions later. I have to clearly that these are all the tested result on F30. I am not sure how other F-series works.Star Diagnosis
Posted by: jean at
02:52 AM
| No Comments
| Add Comment
Post contains 606 words, total size 5 kb.
April 08, 2015
BMW ICOM A2+B+C is the powerful OEM diagnostic system for BMW vehicle models. Misconnection would cause unnecessary problems. Here is the detail instruction on BMW ICOM diagnostic tool connection.
Fig1 below display the BMW ICOM A2+B+C accessories:
ICOM A
ICOM B
ICOM C
LAN cable
Laptop or computer
How to connect BMW ICOM A2+B+C correctly?
Fig 2 and Fig 3 explain the whole connection of BMW ICOM
Fig 2: BMW ICOM A2+B+C without WIFI connection
Fig 3: WIFI BMW ICOM A2+B+C connection
Connection Instruction:
1) Setup BMW ICOM A, ICOM B and ICOM C
2) Connect BMW ICOM A2+B+C main unit to the vehicle OBD port
3) Wait the indicator light on the main unit illuminates
4) Connect the ICOM with vehicle using LAN cable
5) Power on the computer and install software
Posted by: jean at
06:36 AM
| No Comments
| Add Comment
Post contains 144 words, total size 5 kb.
April 06, 2015
When you installed a repaired DSC (Dynamic Stability Control) module to enable cruise control, odometer etc function, the DSC light will illuminates. BMW INPA software will read the fault code, but you need NCS-Expert software to get the module coded. Here is the detail instruction on coding E39 DSC module with NCS-expert.
Tool needs:
BMW ICOM A2+B+C diagnostic system hardware
BMW ICOM NCS-Expert software (included in BMW ICOM software HDD)
Instruction:
Install DSC module
Well install NCS-Expert software and connect the BMW ICOM a2+b+c main unit with vehicle via OBD socket
After well loaded with software, click File >>Load Profile
Select "Expertmode"
Press "F1 VIN/ZCS/FA"
Select "F3 ZCS/FA f. ECU"
Select your BMW chassis type: E39
Select ECU type: IKE, press OK
Then NCS-Expert will display vehicle data/information, press "F3 ZCS/FA f. ECU" to continue.
The software will display all the modules are available to be coded below "get coded" icon.
Select "F4 Process ECU" to code a specific single module.
Then the system will display a list of all coding available modules. Select the module you want to code: DSC.
NCS-Expert software will display "DSC get coded" message. Click "F3 Execute job" button
DSC module coding is completed. DSC indicator light on dash turn off. No fault codes stored for DSC module.
Exit the BMW NCS-Expert coding software. http://www.obdii365.com
Posted by: jean at
03:01 AM
| No Comments
| Add Comment
Post contains 228 words, total size 7 kb.
April 03, 2015
After well install the Bluetooth AutoHex â…¡ Hyundai and Kia GDS diagnostic scan tool software, you need to register your unit. Here displays the register and update instruction of GDS software.
Same procedure applied to AutoHex BMW software.
How to register AutoHex 2 software?
1) Login to www.autohex.net, and create a new account with your email address and password.
2)
Come to "Device Registration" windows, the system will display
"Microtronic Autohex registration Confirmation" prompt, confirm from the
link: Autohex online.
3) Register is completed.
How to update AutoHex 2 software?
1) Connect the AutoHexâ…¡scan tool interface with computer via USB port.
2) Press Configuration Tab, the system will display software information.
3) Run AutoHecPC software on the desktop
4) Go to "UPDATE" button
5) Register the AutoHex II in the same information you entered previously.
NOTE: DO NOT disconnect the AutoHex hardware interface with computer during the update process. The software may close and open several times during updating process.
6) The AutoHex II software is registered and updated. The car list will show up and ready to use the software.
http://www.obdii365.com
Posted by: jean at
05:46 AM
| No Comments
| Add Comment
Post contains 191 words, total size 4 kb.
32 queries taking 0.2322 seconds, 185 records returned.
Powered by Minx 1.1.6c-pink.