ODIAG CAS4 CAS4+ Test Platformused forBMW locksmith, maintenance engineers and CAS4/ CAS4+ programming engineers. It features in all keys lost, add new key, synchronize test and troubleshooting. Works together withGodiag GT100&XHORSE VVDI2/ VVDI BMW Tool/VVDI BIMTOOL Pro/ Lonsdor K518 /Autel IM608etc, it can program new key when all keys lost, add new key and replace CAS4 / CAS4+ ECU module.

Firstly, start with the configuration of GODIAG CAS4 CAS4+ Test Platform.

Here is the specific structure instruction:

1).DB25 female connector(used to connect the male port of GODIAG GT100 / GODIAG OBD2)

2).Ignition simulated start switch

3).Immobilizer dashboard simulated indicator

4).Key sensing area

5).Screw bolt

6).Godiag OEM dedicated CAS4/ CAS4+ power adapter or CAN Communication adapter

7).Godiag OEM dedicated CAS4/ CAS4+ start control adapter

Next, when and how to useGODIAG CAS4 Test Platform?

Case 1: When you lost your car key，you can remove the CAS4 module and corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4/CAS4+.

Case 2: By working together with Godiag GT100 &XHORSE VVDI 2 / BMW VVDI BIM TOOL / AUTEL IM608, etc, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost, add new key and replace CAS4 / CAS4+ ECU module.

Case 3: It can be used to read out & backup the data after preprocessing, and replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access.)

Case 4: Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunction.

Case 5: Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with CAS4/CAS4+.

Case 6: Troubleshooting – when the key can’t start the car, this test platform can be used to tell if whether it is caused by the mismatch between CAS4/ CAS4+and the key.

Last but not least,this test platform adopts the dedicated OEM CAS4 CAS4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.

You should know before purchasing:

At present, GODIAG CAS CAS4+Test Platform cannot be used separately. You’d better use it to work with GODIAG GT100 OBDII ECU Connector. There will be corresponding GODIAG adapter to solve this problem in the future.

www.godiag.co.uk

Posted by: jean at 05:55 AM | No Comments | Add Comment
Post contains 427 words, total size 8 kb.