Yanhua Mini ACDP+ISN Module+N20 interface boardare capable of reading isn mg1 ecu

Build date 2020-09, 2021 bmw m5 comp, VIN: WBS83CH01MCFXXXXX. The ECU model is S63B44T4.

Good to know: N20 interface board is applied to N20\N13\S63 ECU model.

Prepare and hardware connection:

1. For S63 (MEVD172H) and S63 (MEVD172 , here are 4 steps to prepare.

Step 1. Please prepare ACDP, OBP+ICP adapter, interface board and DME.

Step 2. Connect the interface board correctly to the DME interface as shown.

Step 3. Short the CAN resistor on the OBP + ICP adapter to the "CAN-R Join”.

Step 4. Connect ACDP, OBP+ICP adapter, interface board and DME.

2. S63 (MG1CS201), here are are 4 steps to prepare

PS: if the ECU model is B48, please use B48 interface board.

Step 1. Please prepare ACDP, OBP+ICP adapter, interface board and DME.

Step 2. Connect the interface board correctly to the DME interface as shown.

Step 3. Short the CAN resistor on the OBP + ICP adapter to the "CAN-R Join”.

Step 4. Connect ACDP, OBP+ICP adapter, interface board and DME.

Next is the operation onYanhua Mini ACDP APP.

Click on "BMW”.

Click on "DME ISN”.

Click on "Bench Mode Read /Write DME ISN”.

Click on "Fxx”.

Scroll down and you will see S63 (MEVD172H), S63 (MEVD172 , S63 (MG1CS201).

For S63 (MEVD172H), it supports "Identify” and "Read /write ISN”;

For S63 (MEVD172 , it supports "Identify” and "Read /write ISN”;

For S63 (MG1CS201), it supports "Identify” and "Read ISN”;

Next is to follow the on-screen guide to operate.

…

Alright, this is how to useYanhua Mini ACDPto Identify, Read and write ISN for BMW S63.

www.obdii365.com

Posted by: jean at 06:18 AM | No Comments | Add Comment
Post contains 280 words, total size 9 kb.