Renault Duster 95040 all keys lost done by Xtool X100 PAD3

How-to: Renault Duster 2010-2013 all keys lost transponder key programming byXtool X100 Pad2orX100 PAD3(PAD Elite) via eeprom.

 

Step 1: Read Pin Code

 

Remove Renault Duster BCM module and disassemble the module

 

 

Locate chip ic 95040

 

 

 

Desolder the Eeprom chip into xtool adapter

 

Connect the adapter with xtool Eeprom adapter (25XXX)

 

 

 

Then connect Eeprom adapter withxtool x100 pad3
In x100 pad, select Renault ->Immobilizer->Duster->2010-2013->Read pin code->Read Eeprom (95040)

 

 

Eeprom adapter communication indicator flashes

 

 

Read data success, save data

 

Calculate pin code success

 

Take a screenshot of the Pin Code.

 

Step 2: Program Key

 

Solder the eeprom chip back to BCM board and install BCM module

 

 

Feed with power supply and ignition equipments
Select Renault ->immobilizer->Duster->2010-2013->Program key
Switch ignition off, remove the key from the ignition switch

 

xtool will ask to input pin code to access
Manual enter pin code in step 1 and confirm

 

 

Insert a key to be programmed and turn the ignition on
Wait for 10 seconds

 

 

Program key success, select not to program another key
Turn the ignition switch off
Wait for 10 seconds

 

 

Program key finished.

 

Test the new key.

Done.

www.obdii365.com

http://www.key-programmer.org/2021/05/19/program-renault-duster-95040-all-keys-lost-by-xtool-x100-pad2-pad3/

Posted by: jean at 06:51 AM | No Comments | Add Comment
Post contains 197 words, total size 12 kb.