Yanhua Mini ACDP and Volvo module to program key: I only have 2 questions in the videos they show how to read the password, but they do not show how to encode the key, or after reading the password with cem or kvm, the key is encoded by obd2? and the second question. there are two cem or kvm modules in the menu can the password be read randomly from which module or depending on which module is mounted cem or kvm, does volvo just have both modules always?

Here is the guide on how to useYanhua Mini ACDPto program key for Volvo:

For thefull-keyless smart keyprogramming, pleaseremove both CEM and KVM moduleunit, and then to read the both CEM and KVM password, then install the modules back, finally program key via OBD port.

For thesemi-keyless smart keyprogramming, just need todisassemble the CEMcomputer to read the CEM password, then install the CEM back, finally program key via OBD port.

Good to know:

Yanhua ACDP Volvo Module 20works with thenewest Volvo carsand the new Volvo car have only full-smart key, not semi-smart key.

—-Yanhua Mini ACDP Volvo 2018 – 2020 Key Programming Guide

Yanhua ACDP Volvo Module 12supportsolder Volvo carsincluding both full-smart key and semi-smart key.

—-Yanhua Mini ACDP Program Older Volvo Full-Smart Key AKL(Incl. Read CEM & KVM password)

Image 1: The key button on the side is for new Volvo cars.

Image 2: The key button on the front is for old Volvo cars.

Enjoy!

www.obdii365.com

Posted by: jean at 07:07 AM | No Comments | Add Comment
Post contains 254 words, total size 4 kb.