Here is the Mercedes diagnostic multiplexer test report from one of theobdii365.comcustomers.

1=SUPER MB PRO M6

2=MB SD C4 Plus DoIP

3=SD Connect Compact C4 old

So I bought a Super MB M6 for fun.

A report from all three.

The first two no longer need batteries or an ad hoc connection.

They have a built-in access point and always show a LAN connection (in SD Toolkit) even though they are connected to WiFi.

The first two can also doip, whether one is needed is an open question.

The firsthas a built-in fan for better cooling.It works like SD-C4 theconfiguration must be done in sd toolkit.

But it makes a very good impression and the workmanship is also good. It works very well for me. The connection is stable with the car and computer via wifi (not like in old c4… always on cable). Monaco, vediamo, das, Xentry, update via toolkit everything working. Super MB works with every version, nothing has to be done again. WIS EPC also runs on Win 11. I recommend.

Thesecond has a built-in heatsink at the pointwhere the WLAN card was, which no longer exists.

The first has been in continuous use for several months without any problems.

I tested it today on my S class, the Super MB Pro takes 51.68 sec to communicate and the SD C4 Plus takes 52.09 sec on computer Win 11, I5, 8 GB RAM and SSD.

But the old SD Connect still works.

Conclusion I will only buy the first two in the future, preferably the second, because it hasno fan and there is no batterywith either.

And here, too, there are only two types, it works or it doesn’t.

This is just information and not a discussion

Posted by: jean at 06:48 AM | No Comments | Add Comment
Post contains 301 words, total size 4 kb.