September 20, 2023
Openport 2.0 and godiag GD101 J2534 which is a better J2534 passthru device?
Let’s take a look at the comparison table first.
| Item | Openport 2.0 | Godiag J2534/VNCI NANO J2534 |
| Protocols | CAN 2.0
CAN/ISO15765 and K-line KWP2000/dual K-line |
ISO15765, ISO9141, ISO14230, J1850 PWM, J1850 VPW |
| ELM327 mode | – | ELMConfig, ScanMaster, AlfaOBD, FiatECUScan |
| ECUFlash | Yes for Mitsubishi and Subaru | – |
| Honda HDS | Yes | Yes |
| Toyota Techstream | Yes | Yes |
| JLR SDD | Yes | Yes |
| Forscan | Yes | Yes |
| Renault Clip | Yes | Yes |
| Benz Xentry Passthru | Yes | Yes |
| BMW ISTA+ | Yes | Yes |
| Nissan Consult 3+ | Yes | Yes |
| VAG ODIS | Yes | Yes |
| GM GDS2 | Yes | Yes |
| J1979 Tester | – | Yes |
| Subaru SSM4 | Yes | Not tested |
| PCMFlash | Yes | Yes |
| Operating system | Windows XP/Win 7/Win10, better 32bit | Windows 8/10/11, 32/64bit
(driver not recognized if use Win7/WinXP) |
| Firmware Update | – | Yes,How to update Godiag J2534 firmware? |
| Connection | USB | USB |
In sum:
Both cables are cheap and better keep both.
Godiag J2534/VNCI J2534 also works in ELM mode. It is compatible with ELM apps. Openport does not. But Openport comes with ECUFlash for Subaru and Mitsubishi cars.
Both cables will not perform any programming with it. If you need something just to see codes than this will work fine but it is not the universal tool for performing any functions. Both cables can only be used as J2534 devices, they cannot emulator OEM software.
If need a j2534 device that will also emulate original factory software, go forvxdiaginstead.
Posted by: jean at
07:46 AM
| No Comments
| Add Comment
Post contains 245 words, total size 4 kb.
35 queries taking 0.1883 seconds, 171 records returned.
Powered by Minx 1.1.6c-pink.
