We have listed Autel MaxiIM IM608/IM608 Pro/IM508 XP400subscription workable car brands and function before.

But it is not completed. This is the 2022 new complete MaxiIM series online function list.

the following online functions are invalid if the subscription expires.

IM608/IM608 TCP subscription on promotion:$600

IM508 TCP subscription on promotion:$245

Posted by: jean at 06:55 AM | No Comments | Add Comment
Post contains 1072 words, total size 20 kb.

What’s the difference between BMW ICOM Next (SP269-D) and the new Super MB Pro N3 BMW diagnostic tools?

Item	BMW ICOM Next	Super MB Pro N3
Image
Solution	VXDIAG Solution	Original ICOM Next Solution
Connection	USB, WiFi   WiFi password: 12345678 No need for DHCP server or router, it’s build in.	USB WiFi   WiFi password: 12345678 No IP setting. Easy to connect
Vehicle Model	BMW, Mini, Rolls-Royce	BMW, Mini, Rolls-Royce, BMW Motorcycle
Software	BMW ISTA-D   BMW ISTA-P E-sys WinKFP Tool32 INPA BMW Coding tool Ncs Expert KSD2	BMW ISTA-D   BMW ISTA-P E-sys WinKFP Tool32 INPA BMW Coding tool Ncs Expert KSD2
Software update	By HDD/SSD	By HDD/SSD
USB port	Type-C USB	USB 3.0
Heat Dissipation	No	Dual Heat Dissipation
Firmware version		ApplicationImage:147   BootImage: 130
Firmware Update	Via VX Manager   FW Update Guide	Yes, same procedure as the original ICOM Next   http://192.168.92.38.60080/, user name: root password: NZY11502 FW UPDATE GUIDE
Compatible HDD/SSD	Compatible with vxdiag HDD/SSD only	Compatible with both ICOM Next (SS220 series) and VXDIAG HDD/SSD
fiber programming	No	No
20-PIN Vehicle	No	Yes, with an optional 20-pin adapter
10-PIN BMW Motorcycle	No	Yes, with an optional 10-PIN adapter

In Summary:

New Super MB Pro N3 has better software compatibility and more stable firmware than ICOM Next clone.

Posted by: jean at 07:42 AM | No Comments | Add Comment
Post contains 216 words, total size 5 kb.

With the CAN Direct kit you are able to program latest Toyota 8A/4A smart key (add key and all keys lost) with obdstar x300 dp plus without a passcode. Here we successfully generate a simulator key of 2021 Toyota RAV4 to program key.

Device used:
OBDSTAR X300 DP Plus/Key Master DP Plus
Key SIM emulator
OBDSTAR CAN Direct Kit

Remark: Always check CAN Direct kit compatible list below operation.

Procedure

Connect CAN Direct cable with OBD
Connect the Toyota 27 cable with smart box
Go to Immobilizer->Asian->Toyora/Lexus->Latest software version->Manual Select System->Proximity->Type 9 (8A-AA)

Read immo data-> operation in car withCAN Direct kit

This function requires network connection to access server

Reading immo data

Save immo data

Select Make simulator key (Key Sim) function

Select immo data just saved

Generate simulator key successfully.

Restore smart box cable.
The emulator key can start engine now.

You can perform add key or all keys lost with the immo data.

Read also:

OBDSTAR Program Toyota 2021- 4A Proximity All Keys Lost Free PIN Code

Posted by: jean at 07:12 AM | No Comments | Add Comment
Post contains 188 words, total size 13 kb.

Autel MaxiIM seriesKM100,IM508,IM608,IM608 Proglobal versions don’t have Indian, Australian, Brazilian, and Malaysian car brands.

How to add these brands to MaxiIM devices?

1).

If need to activate Australian brands to MaxiIM, contactsales01@autel.com.au

For AU: Ford, Holden

2). If need to activate license for Latin American, Indian and Malaysian car brands, visithttps://www.autel.com/wheretobuy.jhtml

Select the corresponding region and agent to pay for the license

Indian agents for: Maruti Sukuzi, Mahindra, TATA , Indian Datsun

Malaysian agents for Perodua, Proton

Brazilian, Latin American, South American agent for Fiat Brazilian, GM Brazilian, Maruti Suzuki, Mahindra

http://www.key-programmer.org/2022/11/08/how-to-add-indian-australian-brazilian-cars-to-autel-km100-im508-im608/

Posted by: jean at 08:54 AM | No Comments | Add Comment
Post contains 102 words, total size 5 kb.

How to know whether yourLonsdor K518ISE/K518Skey programmer device get update package or not?(or check the update expiration time)

Posted by: jean at 08:35 AM | No Comments | Add Comment
Post contains 119 words, total size 3 kb.

Xtool tech released 2019+ Toyota 8A/4A Smart Key Programming (Via key emulation & generation) function on Oct. 2022. Check Instruction below.

Tools you need

• Xtool tablets (X100 pad3, x100 pad elite,A80/H6 proetc)
• Xtool KC501 programmer
• AnyToyo key emulator/Data collector
• Customized Toyota Smart Key
• Stable Internet Connection

XTool AnyToyo SK1 is a data collector as well as a smart key emulator, allows you to do key cloning process in both add key / all keys lost situations for 2013+ Toyota models with smart key. AnyToyo SK1 can also do emergency start when there is no key available on your hand and generate new keys using AnyToyo smart key that comes with the set.

 

 

Operation Process
Preparation:
We suggest you find the low-frequency antenna before you start programming. Usually, the antenna will be located at these positions

Select Immobilization- Toyota V26.90 or higher- 2019+ models (4A/8A)
If you are using devices with VCI box, make sure that the VCI box is connected to a power supply.

Check key information

If you have an original key, we strongly recommend you to check the information on the key before you start the process
so you will know about the exact chip type.

Connect KC501 to thex100 pad3, take the key into the key slot, select Identity key information

Generate emulator key
We take a 2020 Toyota RAV4 (PCB number 0410/8A-88 key) as an example

The emulated smart key could be used for emergency start or use as a usable key in all keys lost situations.

Get in the menus via "By vehicle” menu or "By Type”- 4A/8A Smart key- 8A smart key0 Generate Simulate Key and connect the emulator to the tablet

As we noted that 2020 RAV4 is using an 8A-88 key, here we select 8A-88。

Sometimes this step could be ignored if you are getting through the menus by searching for the vehicle

Then please input the VIN code and the model year of the car that you are programming. Make sure that you have input the correct VIN code, then click "OK” to continue.

Now turn off the ignition and take the original key out from the car We suggest taking it out for at least 3 meters to avoid interference.

When the device pops out this notice, put the emulator close to the start button. Now the emulator will collect the data from the ignition coil, and the green light will flicker when collecting.

After collection, the green light goes oft and the device will start to upload the data and let the server do the calculations. Make sure that the Internet is well connected.

When the calculation is done, the emulated key will be generated.

Key Generation 8A

Still take the 2020 RW4 as an example.

Click "Generating key (with original keys)” or "Generating key (all keys lost)” and connect the emulator to the tablet.

input the VIN code and the model year of the car

Turn ignition off and take the original key out from the car.
Then when the notice pops out, put the emulator close to the start button and the emulator will start collecting and calculating.
After the collection and the calculation has done, we are now generating a new key. Please select the remote frequency of the key.

Please note that if you dick the wrong frequency, the remote and smart function will no longer work. Please make sure that you are selecting the correct frequency – this will vary upon different markets. If you have troubles finding the correct frequency, we will have some notices that mark the frequencies for different markets.

Then select the function of the THIRD button of the key (the button close to the lock/unlock button)

Normally the Toyota 8A/4A smart key will have 3 or 4 buttons on it. The lock/unlock/PANIC button are always the same, but the trunk (orA/C) button varies from different models (sometimes that button is missing). Please select it properly. If the key itself doesn’t have this button, select any of them will be OK.

Now find the lowfrequency antenna that is located inside the car. Put the emulator close to the antenna and the green light will flicker

When collecting data from the door handle, please dose the door and touch the sensing area on the front of the handle.

After that, pull the emulator out and connect KC501 to x100 tablet

Put the original key into the key slot

This step will be skipped when you are working in an all-keys lost situation.

After reading the original key, take it out and put the NEW KEY inside the slot. A battery needed to be installed into the new key before you continue.

Now the device will upload the data to the servers for calculations.
When this is done, the key will be generated Please check the remotes and see if it works. If it still doesn’t work after clicking several times, click "No” in this window to try again.

If the remote and smart function is not working, please click "No” and select other frequencies.

KEY GENERATION – 4A

There are some differences when programming 4A keys. We will take a 2021 Toyota Corolla as an example.
As before, we connect the emulator; turn ignition on if possible, then input the VIN, and turn off the ignition and take the original key out.

But after you collect the data from the low-frequency antenna (when the green light goes off), take the original key back inside the car; take it close to the emulator and press the remote button for several times.

The remote collection process will be skipped when you are working in an all-keys-lost situation.

After the calculations are done, take out the original key again, and collect the data from the low-frequency antenna again.

When this shows up, disconnect the collector and connectXtool KC501instead

Now put a NEW KEY with battery inside the slot.

Now it shows a success. Please check the remotes and see if it works. If not, click "No” to retry

Posted by: jean at 07:07 AM | No Comments | Add Comment
Post contains 1442 words, total size 22 kb.

FCA Mitsubishi Bosch EDC17CP52 users’ working experience:KT200manual does not specify to use capacitor Tried without cap could not get to connect till add cap 10uf/25V and successfully enters programming read/write/checksum.

if you look in yourKT200 Kitsupplied, you will see 2 blue small adapter pins – these include the built in capacitors. There is no need to use external as connected, on CP and CV it is advisable to use if you cannot get connection.

blue i believe depending on kit supplier D48conn04

BOSCH EDC17 CP52 [ 1797 ] – Fiat, Alfa Romeo, Lancia [Diesel] Pinout to KT200

Posted by: jean at 06:49 AM | No Comments | Add Comment
Post contains 98 words, total size 4 kb.