In theprevious postwe gave key programming tips for 2021+ Honda Accord/Civic for Autel IM608/IM508. Same asAutel KM100. Here is the step-by-step guide of programming Honda Accord 2021 All Keys Lost by KM100.

Step 1: Generate remote

Go to Universal key generation, generate Honda Accord 2018-2022 remote

Step 2: Program Key

After generate remote, press IMMO function->Push to start->Control Unit->Keyless System (Honda)->All keys lost

Place a key to be learned in the vehicle and take all other keys out of the vehicle.

Release engine start/stop button

Ifautel maxiim km100asks if the key is new models, press No. (It does not depend on the model year but on key type. Old key style old system. check previous post at the beginning)

Switch ignition off

Register key completed.

Done.

Posted by: jean at 07:51 AM | No Comments | Add Comment
Post contains 135 words, total size 15 kb.

Both Autel MaxiPro MP808 and Xtool D8 are competitive bi-directional diagnostic scanners? Which one to choose? Check comparison below:

Table 1: Parameter Comparison

Table 2: Model Year/System/Function Coverage

Posted by: jean at 07:39 AM | No Comments | Add Comment
Post contains 1621 words, total size 14 kb.

Opel zafira 2001 add key by dump successfully withAutel MaxiIM KM100.

Had to read dump with a different tool and then made a key by dump using the km1oo.

That is a tms chip and data can be read with orange 5, xprog orvvdi prog.

You can upload file to km100 with Memory card or usb with OTG adapter.

The km100 didn’t give option to write back file he told me the chip can run the car. pcf7935 generate as ID40.

Car starts perfectly.

You can also read pin code and program via OBD withAutel im508.

Posted by: jean at 07:56 AM | No Comments | Add Comment
Post contains 106 words, total size 6 kb.

Problem:

I try to installAutel MaxiIM IM608apk, but it does not allow me. It gave error "blocked installation, for more security, your tablet blocks the installation of applications from unknown sources.”

Any solution?

Solution:

Go to Setting> Security & safe> unknow source click allow to install.

Posted by: jean at 09:25 AM | No Comments | Add Comment
Post contains 51 words, total size 1 kb.

Launch X431 X-prog3aka GIII is used to program BMW Benz VAG Porsche keys and clone/replace ECU/TCU modules. What’s the difference among Launch X431 IMMO Plus, IMMO Elite, X431 V+ and X431 PAD VII with Xprog3?

Check table comparison below:

In sum:

• IMMO Plus has the same key programming and ECU/TCU clone function as IMMO Elite. The difference between these two is that IMMO Elite has basic diagnostics but IMMO plus has full diagnostics.
• IMMO tablets support newer vehicle immo programming, i.e Volvo pre-2022, Toyota pre-2022, X431 V+ and PAD VII do not.
• Pad VII supports online programming, others do not.
• To clone or replace ECU or gearbox TCU with X-prog3, your tablet should have the ability to connect via USB. Launch X431 V+ only connects via Bluetooth, so V431 v+ with G III cannot clone ECU/TCU.

X-prog3 supports following ECU/TCU cloning function:

Posted by: jean at 07:09 AM | No Comments | Add Comment
Post contains 340 words, total size 9 kb.

2021 Kia Sportage Australian Market key programming viaAutel MaxiIM KM100key programmer.

Immo – Generated on VVDI ID70 (VVDIxt27a super chipin a Keydiy KD B28 remote.)
No pin codereading options. at the moment no pin code reading options for 2020+ Kia.
3rd Party VIN to Pin .
Pathway: Kia/Manual selection/ region Europe/ Sportage/2020-22/Bladed/Hot Function/Add Key Guided/
Turn Ignition on with Original
Programming success
New key, turn on, follow prompts.
Remote (oem part number 95430-D9420)
KD online D9200 works a treat.
Pathway as above.
Control Unit/Remote system/Program RKE

Posted by: jean at 07:01 AM | No Comments | Add Comment
Post contains 96 words, total size 3 kb.

Vapon VP996 key programmer released new software update on June 5h, 2023-adding Ford 2020 onwards key programming by OBD.

Vapon VP996KEY PROGRAMMER FORD SOFTWARE UPDATE

Supports both add key and all keys lost.

June 5th, 2023.

Posted by: jean at 06:38 AM | No Comments | Add Comment
Post contains 269 words, total size 10 kb.

Both Launch X431 TSGUNandAutel MaxiTPMS TS508are very efficient TPMS tools for tires.

This is a TPMS sensor. Both of them can program the sensor. Here we make a comparison to tell you the plus and the minus of both.

They have different prices. Autel TS508 this one can work alone. It does not need a tablet or software. You have everything included but also the price is double at this moment.

The price is really double the launch product the TPMS TSGUN.

I like TSGUN more because when you forget to program a sensor you can also program it after that when the tires have pressure inside.

With TS508 if you have pressure on the tire you cannot program the sensor. You should program the sensor before install it on the on the tire and charge it pressure.

This is one plus from the launch, the price is also second plus from the launch. But TS508 it can run alone, we don’t have the tablet. You know it depends which option it shows on your tablet, it can be from 1K euro to 5K euro. But Launch x431 tablet has many other addon modules, videoscope, immobilizer programmer, ADAS, battery tester etc. You can also run Diagzone. With Autel you have to buy separate devices with different functions.

Both of them have the same functionality, both of them make good work.

Launch tsgunis much cheaper and is the most that i use it because I don’t need to pre-install the sensor on the car.

Let’s see how these things work. You knowhow these programmers work actually when you try to install a new TPMS sensor in the car this one will not be able to program it.

programming is too much thing they have the database from all of the cars inside. for example each car they have at least 8 sensor inside for the summer in the winter.

If you have already in his memory for example TSGUN. let’s say eight sensors for Audi and also another one eight sensor for Audis and all the time units are actually the same.

Serial number for this sensor try to look when you program a sensor try to look when you program on different cars and on the same cars, you will see he will give you the same ID number of this sensor like most of the time I pay attention on the cars it will allocate me for five series the same ID number of that sensor and then the car who will believe its original sensor, but it’s not true it’s just a fake sensor they just use the data from original sensor and you you’ll be able to put it inside on the sensor this is the way how it works.

Actually both of them they are not programmable both of them they are tools who can clone the original sensors.

Launch TSGUNPros and Cons

Pros:

It has great battery life and fast speed.

Makes TPMS calibration work much easier
You can scan, program and diagnose TMPS sensor.

program (clone)Launch RF sensor
Quality construction and feels good in the hand
The owners manual was easy to understand
Connect with Bluetooth
It is sturdy, well built, with simple and straightforward functionality

Cons:
It is not a stand alone unit, have to pair with X431 tablet ( you need to select the car first . You have to exit the diagnostic program before you can use the tpms function)

Failed work on some models (i.e Opel Astra K, Nissan Juke 2016, 2012 Chevrolet Camaro.)

Autel TS508Pros & Cons

Pros:
Has a powerful rechargeable battery
Enables user to manually input OE ID into MX-Sensor.
It has a 4 MX-Sensor programming options for convenience
Connects with the TPMS module intilizing OBD2 cable for sensor ID relearning
Indicated vehicle specific relearn procedures.
Offers faster and smarter TPMS repairs with two service modes.
Free sofware updates.

Cons:
It is somehow challengingto update

But both of them make good work and of course we can use it if you think logically they are not programmers they are tools who clone the TPMS sensors.
Programmers is the OEM from the factory and who can allocate the different ID numbers.

It now depends on you which tool do you have. If you have launch x431 product I recommend you the TSGUN if you don’t have it and you must buy separately just buy TS508.

Posted by: jean at 07:35 AM | No Comments | Add Comment
Post contains 743 words, total size 6 kb.

Program a new spare proximity smart key to Nissan Pathfinder 2018 usingAutel MaxiIM KM100successfully.

ID4A, 433.92 FSK – Australian Market
Used Xhorse XS Nissan look key.
(Too early in the morning for remapping Autel buttons) and this profile been confirmed working on 2016 model.

Turn ignition on for Vin Auto Detect.
On successful VIN read, immediately go to the Immo status scan. Compare the detected BCM model to the "naughty list” twice if it’s on the list, walk away.

Blacklist is included in the pics. It refers to the software installed on the BCM that completely shits the bed when you read the Pin code causing the car to no longer start. Typically they installed this BCM software on Qashqai, Juke & Xtrail. Don’t touch them.

For best results tightly clench butt cheeks when you click add key guided. Ignition off, hazards on, open and close door. Pray to appropriate deity of choice.
Contact original and now deleted key from system first. (Remember which key you used first) then hold start button for 2 sec. Dashboard will light up. Ease tension on butt clench 50-70%.
Turn off ignition, program success next one? Yes. Repeat with new key.

Notes on VVDI app say program second one board out of case. Wasn’t required. Turn off ignition again.
Push and hold start button for 5 seconds with the first key you programmed when prompted to exit programming mode. Car will beep 5 times. Turn off hazards, check remote function. Start car. Breathe.

Posted by: jean at 06:35 AM | No Comments | Add Comment
Post contains 264 words, total size 4 kb.

2023 Lexus IS300 all smart keys lost is done byAutel MaxiIM KM100. The device makes the lost key by itself. It does not need to backup immo data or need a 12-digit outcode.

Procedure:

Connect VCI with OBD, pair KM100 with VCI200 via bluetooth.

Select IMMO->Lexus->Manual Selection->USA->IS300->2016-2020->Smart Key->Control Unit-> Keyless System (CAN)

Read number of keys. 2 keys were programmed.

Learn key succeeded.

If remote control is not working, follow instruction here to enable remote keyless function.

Toyota Camry 2022/2023 Car Starts Remote Not Working Solution

Autel MaxiIM KM100does have the ECU Synchronization Learning Function Follow this function route on the KM100 IMMO – Lexus – System Selection – Keyless System – Keyless System (CAN) – ECU Synchronization Learning

Posted by: jean at 07:01 AM | No Comments | Add Comment
Post contains 150 words, total size 9 kb.