After reading all the coding below,wait a while before coding!Please back up and restore your data, and proceed with the coding while you are backed up !!!

Note: The guide was translated from Korean. Credit to Mr.JIHUNX.

Summary

If you are ready to install all the coding programs and the coding cables, we will start coding in earnest.The coding is roughly done in the following order.It would be easier to understand the following outline after drawing the overall outline first.

1. Connect your car and laptop to each other with a cable.
2. Run the coding program to connect to the car (this is the process of connecting the coding program to recognize the car)
3. Download coded data from my car to my laptop (eg download the data set to ‘Beep if the seat belt is released!’).
4. Change the settings on my laptop and save them to my computer (eg change the setting to ‘Do not beep if your seatbelt is released!’)
5. Upload the coding data you saved to my computer to the car.

Connect your car and laptop to each other with cables

Firstconnectyourvehicle and computer with theBMW ENET cable.

Andturn on the vehicle start.If the vehicle is powered off when the coding can be communication is lost in the middle of coding, we recommend that you turn on the ignition coding.However,off the case of a DME / DDE module startup supposed to be (ACC On) Turn on the power only in the state code, which isthe error How to resolve due to the DME / DDE module initialization, please refer to the article.It is recommended that you do not code DME / DDE modules.

Run a coding program to connect with cars

If you have connected the vehicle to the cable and started up as above, runtheE-Sys Launcher.

Choosethecode for your car from the Car Series.The code you choose here is a generic code name for your car.In other words, select F010 for a 5-Series sedan and F030 for an F30.

Tendeyo it is displayed if the program is executed, the following screen,press the connect button to connect to the vehicle.

Press the connect button to display the connection setting screen.Youmustselect Target and Interfacehere.Code Name andE-SysTarget when usually call the model number of the vehicle may vary.

Please check theE-Sys access codeI have uploadedand select the correct Target.If there are several F010s as below, you can choose the one with the latest version of Direct.Usually the latest version is at the bottom of the list.

In theInterface, select Connect via VIN.

Select Target and Interface and pressConnect button.

If the vehicle is normally connected, the following message will be displayed.Click OK to close the window.

Download car-coded data to my laptop

On the left side of the program screen, if Expert Mode is notselected, select Expert Mode and select Coding.

Click the Read button in Vehicle Order.

Right-click on the FA folder and selectActivate FA.

PresstheRead SVT buttonon the right side of the screen.

The modules of the car are displayed in the SVT area.

As an example, let’s show you how to modify one coordinate.I want to change the coordinates ofKOMBIthecoordinates totheHUD_SPRACHEINGABE_ENABLEvalue ofaktiv.

First locate the KOMBI module in the SVT area, select the CAFD with the green V icon on the left side of the KOMBI submenu, click the right mouse button and selectRead Coding Data.

When you read the coded data on the vehicle, the following message will be displayed.Close button to close.

Change settings on my laptop and save it to my computer

CAFD will be changed to a folder, and another CAFD list will be created under it.Select the list, right-click,Edit FDLand select.

The FDL Editor screen will open.Enter coordinates in the search bar to find the desired coordinates.You can find some of the keywords by typing them without having to type in all the coordinates.

I found exactly the coordinate I wanted.

Let’s expand the folder of coordinates and change the value that this function now works.Expanding the Ausgelesen folder hasnicht_aktiva value of.This value is the setting value of the existing functionaktiv. To changethis value to, press the right mouse button and press theEditbutton.

This will bring up the select box so you can select a value, thenaktivselect it.

For some coordinates, you may need to enter a value directly instead of selecting it as above. After selecting Edit,Values from ECUenter the value in thelower area of ​​the screen and thenclick the Exit button on the right of the screen.

If you modified the value well, the save button at the top of the screen will be activated.This is not the step of storing the value in the vehicle, but the step of temporarily saving the value to the current computer.After saving, press the Back button to exit the FDL Editor screen.

Upload coded data from your computer to your car

Now it’s time to transfer the coding values ​​you temporarily saved to your computer to the vehicle.Code FDLButton.

Note:CodeThis is a button, not aCode FDLbutton.CodeButton is a button that initializes the coding.

I am transferring modified coding data from my computer to my car.

A message will be displayed indicating that the vehicle has successfully transferred the changed values ​​and completed without errors.Report 0 errorAnd if there is an error, there is a problem during coding, it is recommended to return the modified value to the original value.

Quitting coding

The coding is finished.Please make sure that the value you just edited is correct.There is no procedure to terminate the coding separately. Normally, the connection button that is clicked before will be changed to the disconnect button. Pressing the button or disconnecting theBMW ENET cableis not a big problem.

www.obdii365.com

Posted by: jean at 06:07 AM | No Comments | Add Comment
Post contains 955 words, total size 36 kb.