Here, you can free download different versions of BMW F-series characteristic coding software including E-sys v3.22.5, Esys 3.26.1, and E SYS v3.27.1.

Where to free download E-sys program?

(newest) E-sys 3.27.1

https://mega.nz/#F!E1YzzSxQ!DRr7BE8YL7GWEX8YqBbH9g

(unknown secirity) E sys 3.26.1

https://mega.nz/#!Z5dgGZRC!uovkspjgtekOvk9tzrhnxUQUQ8hLIF26YDxwSo1740c

(safe) E-sys 3.22.5

http://www.obdii365.com/wholesale/bmw-enet-interface-cable-e-sys-icom-coding-f-series.html

Only E-SYS V3.22.5 is tested by obd365 engineers among all the E-sys versions above. Other versions are shared in the forums; just put it here for share and TRY AT YOUR OWN RISK.

Why to use E-sys v3.22.5?

It is the NEVER-EXPIRE version.

There are many free download links online, but usually, it will expire in a few days or ask you to pay for continuous use or buy tokens.

What to use ENET with E-sys v3.22.5?

DIY an ENET cable BMW with the help of the following guide- it’s easy but requires a bit technique. You can have a try and then decide to whether buy a new one if you fails to DIY.

If you wanna buy enet interface from vendors, don’t spend too much on it- that is, just buy a cheap knock-off online:

http://www.obdii365.com/wholesale/bmw-enet-interface-cable-e-sys-icom-coding-f-series.html

this is a reliable vendor with lots of good reputation talking about in the forums.

How to setup E-sys 3.22.5?

– In Windows system

0 Copy downloaded "psdzdata” folder to "C:\ESysData\” (i.e. "C:\ESysData\psdzdata”)

 

– In MacBook OS 10 Xoperating system

Successfully make BMW ENET cable E-Sys 3.22.5 run inaVirtualWindowsenvironmentrunningunder

MacOSX.

NOTE:

theseinstructionshavebeenpreparedfromaMacBookProrunning

MacOSversion10.7.4,alongwithVMWareFusionversion4.1.2(notinbootcamp

mode),runningWindows7(x86)SP1.

TheconfigurationandinstructionspreparedforE-Syscanbefollowedexactlyasthey

havebeenpreparedfortheWindowsenvironmentherewithinthevirtualwindowsas

well.

PleaseconfiguretheVMWareNetworkAdaptertohaveabridgedconnectiontothe

OSXphysicaladapter,asinthefollowingscreenshot:

Note:
at the time this screenshot was captured, the Ethernet wire was not connected to the car, hence it is shows a red circle in front of the title "Ethernet”. Once connected to the car (or any active ethernet wire), the circle will be green.

Ifdiskspaceisofnoconcern,thentherestoftheinstructionsbelowcanbeignored.However,consideringthesizeofthepsdzdatafolder(approximately15gigabytesandgrowingperrelease),andusuallyvirtualmachinesdonothaveasmuchdiskspaceavailabletothemastheparentOS,onecanstorethepsdzdatafolderontheMacsideandallowE -Systoseethefilesfromwithinthevirtualwindows.

EnsurethatWindowsisabletoseeafolderontheMacOSenvironmentasastandardsharedresource.TheeasiestwaytodothisistoenableSharedFoldersandMirrortheDownloadsfoldertobethesamebetweenthevirtualWindowsandMacOS:

Now, create a folder called "BMW” or anything else that is desired on the Mac’s Downloads folder. The contents of the MacOSX downloads folder will be available in Windows via Z:\Downloads under Windows Explorer.

Inthe~/Users/username/Downloads/BMWfolder,createafoldercalled:"ESysData”,

andcopythecontentsofthefolder"C:\EsysData”tothe"Z:\Downloads\BMW\EsysData”

folder.Nowextracttheentiredownloaded"psdzdata”foldercontentinthepsdzdata

folderoftheMacOSenvironment.Lastly,copy(notmove)thecontentsofthefollowing

folder:~/Users/username/BMW/EsysData/psdzdata/swe

tothefollowingfolderwithintheEsysDatafolderstructurecreatedabove:

~/Users/username/BMW/EsysData/SWE

Pleasenotethatthe"username”thatappearsintheabovetwopathswillbetheMacOS

User’susername.Also,consideringthefactthattheWindowsfilesystemdoesnot

supportcase-sensitivity,thefoldernamecasesspecifiedabovedonothaveany

significanceotherthanreadability.

InE-Sys,fromthe"Options”menuselect"Settings…”andthenselectthe"Program”tab.

EnsurethattheEsysDatafolderpathiscorrectlyspecifiedwithrespecttowherethey

areontheMacOSXenvironmentandtheWindowssharedfolderpath.Seescreenshot:

The EST file also needs to be mapped to E-Sys, and this file can be stored on the Mac side as well. Although it does not have a significant file size, it is advantageous to have this file on the Mac side for those who use Time Capsule as a backup solution and would like these files to be backed-up. In this case, the following illustration shows where the location of the EST file can been configured:

The rest of the instructions that have been prepared for windows need to be followed in order to alter the coding of a BMW via E-Sys running in VMWare Fusion and MacOSX.

How do people think of ENET cable?

Coding F10 sport display – Success

"As always open upEsys 3.22.5, Read FA, Read SVT and activate FA. Then read the coding data from HU_CIC or HU_NBT and the KOMBI module and edit the FDL to make the changes. I have managed to activate sport display for my F10”

DIY enet cable is easy – Success

"I myself did a ENET cableas online shops display, only using a CAT5 lan cable, a 510-560 ohm resistor and a OBD male plug, or, purchase it online. Only four wires are connected and there is no need to ground anything… anyone can try it”

coding auto start stop off notification on 2012 F30s – Success

"I changed the build date on my VO to 0712, VO coded KOMBI and it all works! When auto start stop is not running, I get a notification on my instrument cluster just like on the 2013 models!”

F30 video in motion coding – Success

"good at video in motion coding.. I used this cable to enable it for the passenger to enjoy watching a DVD that help me save a lot!”

Reactivate F30 FSC codes – Success

"it helped me reactivate FSC codes without problemsusedE-sys programto read all FSCs and certficates.and usedTool32to clear the FSC store and then use E-sys to reload all FSC’s and certs and activate them.”

It can run on MacBookPro– Suceess

"i managed to coding via E-Sys running in VMWare Fusion and MacOSX. (aMacBookProrunningMacOSversion10.7.4,alongwithVMWareFusionversion4.1.2(notinbootcampmode),runningWindows7(x86)SP1)”

Posted by: jean at 05:51 AM | No Comments | Add Comment
Post contains 891 words, total size 14 kb.