Question:Can I use vvdi key or cgdi Mercedes key and program it withXtool kc501???

Answer:

Both Mercedes BE key and BGA key from VVDI / CGDI can be used to program with Xtool KC501.

Here are the source of Mercedes BE key from Xhorse:

https://www.obdii365.com/wholesale/xhorse-vvdi-be-key-for-vvdi-mb-tool.html

BGA key from Xhorse:

https://www.obdii365.com/wholesale/benz-fbs3-mb-bga-keyless-go-key-433mhz.html

and Mercedes BE key from CG:

https://www.obdii365.com/wholesale/cg-key-for-cgdi-mb-key-programmer.html

BGA key from CG:

https://www.obdii365.com/wholesale/mb-fbs3-bga-keylessgo-key-315mhz.html

Good to know:

Usually, Xtool KC501 is connected to Xtool PAD to program Mercedes Benz key. If no Xtool PAD like X100 Pad3, you can use Xtool KC501 as a programmer to plug into a computer, then to read out EIS data and load it into VVDI MB / CGDI MB to generate the key.

This article is onhow to read EIS data and then to add new keyusing Xtool X100 Pad3 + KC501.

And look at the image which shows Xtool KC501 connected to a PC:

Guide on generate key and read key chip using Xtool KC501:

Put the key or key chip into the slot accordingly, connect to PC via USB, and open the software on PC

Info: Read the key information

Unlock: Unlock the key

Generate: Generate the key according to the chosen car brand

Select the car brand and tap the "generate” button, key will be generated.

Can read the data of the current key chip.

Enjoy!

www.obdii365.com

Posted by: jean at 07:48 AM | No Comments | Add Comment
Post contains 233 words, total size 7 kb.