June 03, 2017
Read FSC file from your BMW using this tutorial. Check out below images or save all of them to your PC.
Notes:
F001 psdzdata covers the F01/F02/F03/F04/F07 (5-Series GT is an F07 NOT an F10)
F010 psdzdata covers the F06/F10/F11/F12/F13/F18
F020 psdzdata covers the F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36/F45/F80/F82/F83 (There is no Z4 F-chassis yet)
F025 psdzdata covers the F15/F16/F25/F26/F48/F85/F86
F056 psdzdata covers the F64/F55 F56 (Cooper Mini’s)
I001 psdzdata covers the i3/i8
Picture Guide Step-by-step:
Cable & software required:
BMW ENET Cable(Ethernet to OBD) Interface with E-sys F-series Coding software
1.Press START button without foot on the brake
2.Connect ENET cable to OBD port
3.Connect Ethernet cable to laptop
4.StartE-syssoftware
5.Click Connect
In this example,car is F30, we select F020.
Make sure you do not select_DIRECT!!!
You should see Connection via VIN checked and your VIN shown
Click CONNECT
Select Expert Mode
Click FSC-Extended
Write Diagnostic Address(hex):0x63 and click Identify!
After that,write Application Number: 0xDE and Upgrade Index: 0x1
Select StoreFSC and click the button "Add to the batchâ€
Click Read and after that,click SAVE.
Save the file as De.fsc on your desktop
http://www.obdii365.com/wholesale/bmw-enet-interface-cable-e-sys-icom-coding-f-series.html
Posted by: jean at
03:51 AM
| No Comments
| Add Comment
Post contains 191 words, total size 7 kb.
35 queries taking 0.0782 seconds, 170 records returned.
Powered by Minx 1.1.6c-pink.