October 06, 2017
I have been interpreting the text in E90 clubs in Japan.
The battery reset is said to be in the inpa … (There are 3 different methods of vehicle,
Battery (IBS) reset can be done withBMW INPA K+DCAN cable.
1. First Method
1 Select your car model
2 Select your engine type (MS or MSV in front of the engine type)
3 Select Status (F5)
4 Select PM-IBS (F5)
5 Click B Exchange (F5)
6 Popup (OK) should appear if job is done.
2. The second method
Step 1: select BODY from the left hand pop-up menu
Step 2: select POWER MODULE in the right hand list
Step 3: select ACTIVATE from the next menu
Step 4: Select ACTIVATE2 from the next menu
Step 5: Then select F7 – Register battery replacement. Almost instantly you get the message: "Register battery replacement Activated properly.â€
3. The third method
In that case you open up Toolset 32 ​​(under EDIABAS folder):
1. Open MSD80.prg
2. Look up steuern_batterietausch_registri. (near bottom of job list)
3. Go to Jobs menu
4. Select Run Job
Use ncs expert to change the ampere to 70ah -> 90ah in the CAS module.
Battery reset is available only inINPA.
After clicking STATUS button, click PM-IBS second state B, and press amperage and battery old
You can see the current charge.
Press B change to change the battery and press reset to reset the IBS intelligent battery system.
If you look at status B, the old status is changed to 0 and the battery run is reset.
I have not tried it yet … You can try it yourself.
Posted by: jean at
03:36 AM
| No Comments
| Add Comment
Post contains 281 words, total size 2 kb.
35 queries taking 0.2097 seconds, 169 records returned.
Powered by Minx 1.1.6c-pink.