Problem:

It is a BMW 3 Series 2013 all keys lost.Yanhua Mini ACDPreads the info before ‘pre-processing’ fine. When do preprocessing, it’s saying "Doesn’t support this SW version”. How to do it?

Solution:

Some versions are not supported for preprocessing, always worth checking by obd before removing.

ACDP cannot work with the firmware version on the module. You need to upgrade it to a compatible firmware.

How to update FEM software with ACDP?

You can update FEM with ACDP without other tools.

Go to theRestorefunction.

Perform the 3 steps.

• Step 1: Backup coding data
• Step 2: Program the FEM/BDC system
• Step 3: Write coding data

Follow the steps to upgrade and choose right SWFL version.

In Step 2 choose update firmware version to 2nd option.

NOTE: Always backall up first then proceed.

If you have Autel tools, you can update FEM withAutel IM508/IM608as well. Make sure you do it on bench and backup coding first.

Go to BMW FEM and do version detect. It will say not supported. Then go to the programming option, ecu upgrade, it will take 10mins. Make sure you have good internet.
Then use ACDP to add key.

Or useXhorse VVDI2, it covers all of versions.

Posted by: jean at 09:13 AM | No Comments | Add Comment
Post contains 212 words, total size 5 kb.