We have done aW211 all keys lostwith xtool x100 pad3 in 3 minutes. Today we did All Keys Lost on Bench on a Mercedes W212 EIS Success with the xtool pad 3 and M821 adapter.

Device required:

Xtool X100 PAD3/Pad Elite/H6 Pro/A80 Proetc

Xtoool KC501 eeprom adapter

Xtool M821 Benz AKL adapter

Mercedes BE key

*M821 adapter cannot be used with x100 pad/pad2.

x100 pad3 will show you wiring diagram

Procedure:

Go to Immobilizer- Infrared key system- Key programming- All keys lost-W212

Follow the steps below to program key
1. Read EIS information
2. Read password from EIS
3. Genereae key file
4. Write the data to the new key

Check wiring diagram
Select Operation on bench

Connect KC501 to x100pad3, connect Benz IR key emulator onto KC501
Read EIS informamtionn

Press Next to continue
Insert IR key emulator into the EIS, or pull it out for several seconds and inset it again if the emulator already inserted

Calculate password success

select an unused key position to be generated and key format, press OK to continue
insert a new key into KC501 infrared key slot

Write key successfully

Read key information and test the new key

Posted by: jean at 09:07 AM | No Comments | Add Comment
Post contains 207 words, total size 13 kb.