OBDSTAR adds Motorcycle key programming functions with the Motor immo adapter kit. Here is an example on program Yamaha NMAX 160 proximity all keys lost by MS80.

Device required:

OBDSTAR MS80+MS80 Motor immo kit

OrOBDTAR X300 DP plus/X300 Pro4+OBDSTAR Motor Immo Kit

New key to be programmed

Procedure:

Go to IMMO->MOTOR->Yamaha-> Select from model-> NMAX->Proximity->Read PIN Code
This function requires network connection

If OBDSTAR asks do you have original key, press No, here we lost all keys.

Follow the instructions to connect Motor adapter kit with MS80

Disassemble the SCU shell

Connect 12V power supply+OBD main cable+ P001 adapter + C002 small board+ w001 programmer cable with SCU and OBDSTAR tablet

OBDSTAR will show you step-by-step operation instructions as well

Before reading pin code, make sure you have backup the eeprom data

Read pin code successfully.

Now you can add key with the pin code.

Just follow obdstar prompts until finished.

http://www.key-programmer.org/2023/02/01/obdstar-program-yamaha-nmax-160-motor-all-keys-lost/

Posted by: jean at 07:48 AM | No Comments | Add Comment
Post contains 161 words, total size 14 kb.