November 04, 2025
Problem:
Added 2 keys to Fiat Ducato 2015 with Marelli BSI, i used also Marelli keys . Programming was successful byxhorse vvdi key tool plus, car starts but remote is not working, already did disconnect battery , disconnected bsi power , leave key 5 min. On ignition, waited more then 10 min. But remote will not work. How to get remote working?
Possible solutions:
1.
Keep opening and closing the door a couple of times while pressing remote buttons and they eventually started working.
2.
Replace the battery in the fob. Brand new car had the same problem. Turned out to be a faulty battery, been in the fob from manufacture.
3.
When you program the new key,try to disconect battery for 5 minutes!Then stard the car,and sinchronise remote!
4.
Don’t use Xhorse key tool plus. It doesn’t pre code the remote data properly. Autel will work no problem.
Or use keytool to virgin the key, then use other tool (Autel/Lonsdor) to make dealer key.
Also, try to obtain keys with pcf7946 14 leg chip.
Posted by: jean at
06:10 AM
| No Comments
| Add Comment
Post contains 185 words, total size 3 kb.
35 queries taking 0.1085 seconds, 195 records returned.
Powered by Minx 1.1.6c-pink.
