Question withYanhua Mini ACDP+Module 3:I try to read ISN DME mevd1724 N20 engine, I have info that read ISN is not supported. Any solution?

Solution:

With an extraN20 adapter board, it works as it should.

Look at DME N20 Bench Integrated Interface Board for Yanhua Mini ACDP:

New N20 interface boards replaced the old one. Reading and writing from DME on bench.

No need to open the DME shell. No need to drill the hole.

Simple operation!

Plug to use it directly!

Avoid wrong plug and connection!

Safe and reliable connection!

How to useN20 adapter boardwith ACDP to read /write ISN DME mevd1724 on bench?

1. Hardware connection.

Step 1. Please prepare ACDP, OBP+ICP adapter, interface board and DME.

Step 2. Connect the interface board correctly to the DME interface as shown.

Step 3. Short the CAN resistor on the OBP + ICP adapter to the "CAN-R Join”.

Step 4. Connect ACDP, OBP+ICP adapter, interface board and DME.

2. Software operation

BMW -> DME ISN -> Bench Mode Read/Write DME ISN -> Fxx -> N20 (MEVD1724) -> Identify, Read /Write ISN…

To sum up:

On bench read and write ISN DME BMW Fxx chassis N20 (MEVD1724) and more from Exx, Fxx, Gxx, Ixx, Rxx, suggest use ACDP basic module + Module 3 +adapter board.If need toclone N20/N13/N55/B38 DMEECU, you will also needA51C software license.

Yanhua mini ACDP Read Write BMW ISN DME List

Posted by: jean at 06:17 AM | No Comments | Add Comment
Post contains 239 words, total size 12 kb.